Download pdf guide - VSN International

10 Tabulation of the data and prediction from the model 166List of predict plot optionsoptionactionˆaddlines factorsˆnoSEsˆsemult rˆjoinmeansPredictions involving two or more factorssuperimposes the raw data with the data points joined using thegiven factors which must not be prediction factors. This optionmay be useful for repeated measures data.specifies that no error bars should be plotted (by default, theyare plotted)specifies the multiplier of the SE used for creating error bars(default=1.0)specifies that the predicted values should be joined by lines (bydefault, they are only joined if the x-axis variable is numeric)ˆxaxis factorˆsuperimpose factorsˆcondition factorsLayoutˆgoto nˆsaveplot filenameˆlayout rows colsIf these arguments are used, all prediction factors (except forthose specified with only one prediction level) must be listedonce and only once, otherwise these arguments are ignored.specifies the prediction factor to be plotted on the x-axisspecifies the prediction factors to be superimposed on the onepanel.specifies the conditioning factors which define the panels. Theseshould be listed in the order that they will be used.specifies the page to start at, for multi-page predictions.specifies the name of the file to save the plot to.specifies the panel layout on each pageˆbycolsˆblankpanels nˆextrablanks nˆextraspan pandImproving the graphical appearance (and readability)specifies that the panels be arranged by columns (default is byrows)specifies that each page contains n blank panels. This sub-optioncan only be used in combination with the layout sub-option.specifies that an additional n blank panels be used every p pagesThese can only be used with the layout sub-option.ˆlabcharsize nˆpanelcharsize nˆvertxlabspecifies the relative size of the data points/labels (default=0.4)specifies the relative size of the labels used for the panels (default=1.0)specifies that vertical annotation be used on the x-axis (defaultis horizontal).