Download pdf guide - VSN International

12 Command file: Running the job 182NewNewH[g] (!HARDCOPY g) replaces the G option when graphics are to be written to filebut not displayed on the screen. The H may be followed by a format code e.g.H22 for .eps.Q (!QUIET) is used when running under the control of and editor such as ASReml-Wto suppress any POPUPs/ PAUSES from ASReml.ASReml writes the graphics to files whose names are built up as[][][]. where squareparentheses indicate elements that might be omitted, is the nameportion of the .as file, is any argument strings built into the outputnames by use of the !RENAME qualifier, indicates the contents of the figure(as given in the following table), is inserted when the job is repeated(!RENAME or !CYCLE) to ensure filenames are unique across repeats, isinserted to distinquish files produced from different sections of data (for examplefrom multisite spatial analysis) and indicates the file graphics format.file contentsRVSHRvEXYGiPV imarginal means of residuals from spatial analysis of a sectionvariogram of residuals from spatial analysis for a sectionresiduals in field plan for a sectionhistogram of residuals for a sectionresiduals plotted against expected valuesfigure produced by !X, !Y and !G qualifiersPredicted values plotted for PREDICT directive iThe graphics file format is specified by following the G or H option by a numberg, or specifying the appropriate qualifier on the top job control line, as follows:g qualifier description 1 !HPGL HP-GL pgl2 !PS Postscript (default) ps6 !BMP BMP bmp10 !WPM Windows Print Manager11 !WMF Windows Meta File wmf12 !HPGL 2 HP-GL2 hgl22 !EPS EncapsulatedPostScript eps