Download pdf guide - VSN International

14 Error messages 229Table 14.2: List of warning messages and likely meaning(s)warning messagelikely meaningWarning: e missing valuesgenerated by !^ transformationWarning:matrixi singularities in AIWarning: m variance structureswere modifiedWarning: n missing values weredetected in the designdata values should be positive.usually means variance model is overparameterized.the structures are probably at the boundaryof the parameter space.either use !MVINCLUDE or delete the records.Warning: n negative weights it is better to avoid negative weights unless youcan check ASReml is doing the correct thingwith them.Warning: r records were readfrom multiple linesWARNING term has more levels [ ##] than expected [ ## ]:Warning: term in the predict!IGNORE listWarning: term in the predict!USE listWarning: term is ignored forpredictionWarning: Check if you need the!RECODE qualifierWarning: Code B - fixed at aboundary (!GP)Warning: Eigen analysis check ofUS matrix skippedWARNING: Extra lines on the endof the input file ...:Warning:termFewer levels found inWarning: FIELD DEFINITION linesshould be INDENTEDcheck you have the intended number of fieldsper line.You have probably mis-specified the numberof levels in the factor or omitted the !I qualifier(see Section 5.4 on data field definitionsyntax). ASReml corrects the number of levels.the term did not appear in the model.the term did not appear in the model.terms like units and mv cannot be included inprediction.!RECODE may be needed if the binary file wasnot prepared with ASReml.suggest drop the term and refit the model.matrix is probably OK.this indicates that there are some lines on theend of the .as file that were not used. Thefirst ”extra” line is displayed. This is only aproblem if you intended ASReml to read theselines.ASReml increases to the correct value.indent them to avert this message.