KODAK Photo Printer 6850

Calibrating the Printer
Error Message Description or Cause Possible Solution
The printer is busy. The printer is not ready for
calibration.
The ribbon is advancing. The printer is not ready for
calibration.
The operator panel is in use. The printer is not ready for
calibration.
The printer is initializing. The printer is not ready for
calibration.
Wait a few minutes until the operator
panel Ready light is illuminated.
If this message continues to occur, power
the printer off and then on.
Wait a few minutes until the operator
panel Ready light is illuminated.
If this message continues to occur, power
the printer off and then on.
Press the Clear button to return to Ready.
If this message continues to occur, power
the printer off and then on.
Wait a few minutes until the operator
panel Ready light is illuminated.
If this message continues to occur, power
the printer off and then on.
Paper error. The paper is empty or not loaded. Load the paper. See See “Loading the Paper”
on page 1-9.
Paper empty. The paper is empty. Reload the paper. See See “Loading the
Paper” on page 1-9.
Ribbon empty. The ribbon is empty. Reload the ribbon. See See “Loading the
Ribbon” on page 1-5.
Paper jam. The paper is stuck in the printer or
paper path.
Cover open. The upper cover is open or not
latched.
Printer error: 2500. Please
call for service.
Printer error 2504. Please call
for service.
Clear the paper jam. See See “Clearing a
Paper Jam” on page 6-3.
Close the upper cover by pressing on the
center of the cover until it clicks.
_ Contact your KODAK Service Representative.
Have available:
the error code number
the printer model number and serial
number (listed on the printer data plate)
_ Contact your KODAK Service Representative.
Have available:
the error code number
the printer model number and serial
number (listed on the printer data plate)
3-10 May 4, 2005