KODAK Photo Printer 6850

More documents

Recommendations

Info

Calibrating the Printer Error Message Description or Cause Possible Solution The printer is busy. The printer is not ready for calibration. The ribbon is advancing. The printer is not ready for calibration. The operator panel is in use. The printer is not ready for calibration. The printer is initializing. The printer is not ready for calibration. Wait a few minutes until the operator panel Ready light is illuminated. If this message continues to occur, power the printer off and then on. Wait a few minutes until the operator panel Ready light is illuminated. If this message continues to occur, power the printer off and then on. Press the Clear button to return to Ready. If this message continues to occur, power the printer off and then on. Wait a few minutes until the operator panel Ready light is illuminated. If this message continues to occur, power the printer off and then on. Paper error. The paper is empty or not loaded. Load the paper. See See “Loading the Paper” on page 1-9. Paper empty. The paper is empty. Reload the paper. See See “Loading the Paper” on page 1-9. Ribbon empty. The ribbon is empty. Reload the ribbon. See See “Loading the Ribbon” on page 1-5. Paper jam. The paper is stuck in the printer or paper path. Cover open. The upper cover is open or not latched. Printer error: 2500. Please call for service. Printer error 2504. Please call for service. Clear the paper jam. See See “Clearing a Paper Jam” on page 6-3. Close the upper cover by pressing on the center of the cover until it clicks. _ Contact your KODAK Service Representative. Have available: the error code number the printer model number and serial number (listed on the printer data plate) _ Contact your KODAK Service Representative. Have available: the error code number the printer model number and serial number (listed on the printer data plate) 3-10 May 4, 2005
Error Message Description or Cause Possible Solution USB communication error. The software is unable to communicate with the printer. Calibrating the Printer Check the USB cable connection. Replace the USB cable. Try using a different USB port on the computer. If the printer is connected through a USB hub, try connecting directly to the computer. May 4, 2005 3-11
Page 1 and 2: KODAK Photo Printer 6850 User Guide
Page 3 and 4: 1. Filter openings 2. Cover release
Page 5: Operator Panel Kodak Photo Printer
Page 8 and 9: Table of Contents 5 Maintaining the
Page 10 and 11: Setting Up the Printer Before You B
Page 12 and 13: Setting Up the Printer Installing t
Page 14 and 15: Setting Up the Printer Thumb wheel
Page 16 and 17: Setting Up the Printer Connecting t
Page 18 and 19: Setting Up the Printer Paper guide
Page 21 and 22: 2 Installing the Printer Driver Sof
Page 23: Installing the Printer Driver Softw
Page 26 and 27: Calibrating the Printer 1. Select S
Page 28 and 29: Calibrating the Printer 10. Click S
Page 30 and 31: Calibrating the Printer 20. Check t
Page 32 and 33: Calibrating the Printer Uninstallin
Page 37 and 38: 4 Operating the Printer Making Prin
Page 39 and 40: 5 Maintaining the Printer Cleaning
Page 41 and 42: Cleaning the Platen Roller Platen r
Page 43 and 44: 6 Troubleshooting Resolving Potenti
Page 45 and 46: Clearing a Paper Jam Method 1 Kodak
Page 47 and 48: Appendix A: Important Printer Infor
Page 49: Thermal Printer Cleaning Kit Import
Page 52 and 53: Safety and Regulatory Information S
Page 54 and 55: Safety and Regulatory Information N
Page 56 and 57: Index O online user guide, 1-11 ope

KODAK Photo Printer 6850

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?