Multisport 270 Owner's Manual - Aquaglide

C-9C-11FrontBridle Straps9. Reconnect the webbing to the rope using the ladder lock buckle.Back10. Once connected, leave the bridle strap as long as possible. Tuck thewebbing end through the elastic retainer to secure it.C-1012. Next, locate the last remaining webbing strap on the sailing harness.This strap is part of the forestay, which goes to the front of the hull.FrontRetainerBackC-1211. Repeat steps C4 - C10 to install the second bridle strap on theopposite side of the hull. Once completed, the hull should look like thephoto in C11 on the following page.ForestayFrontfor more info go to:12Aquaglide, Inc. #1 North Shore Dr, SE White Salmon, WA 98672 TEL: (509) 493-4938 FAX: (509) 493-4966www.Aquaglide.net