Atlantis 32 Channel Manual - Qvis Security

More documents

Recommendations

Info

(1) alarm input (2) grounding (3) RS2<strong>32</strong> (4) alarm output (5) RS485ParameterGMeaninggrounding (earth)C1, NO1 Alarm output interface(constant open type)T, R RS2<strong>32</strong> portA, B 485communication interface which is connected with the recordingcontrol equipments such as the decoder2.8.1 Alarm input port specification1 channels alarm input. Alarm input type unlimited.The earth and the com port of the alarm sensor are parallel (The alarm sensorhas an external power supply) .The earth of the alarm and the DVR should be shared.The NC port of the alarm sensor must be connected with the DVR alarm inputport.The earth of the power supply and the alarm sensor must be shared when usedin an external power supply.2.8.2 Alarm output port specification2 channels alarm output. There is an external power supply when using theexternal alarm equipment.Please refer to the relevant relay parameters to avoid overloading that damagesthe DVR.12
2.8.3 Alarm output port relay parametersType: JRC-27FInterface materialRating(resistance load)SilverRating switch capacityMaximal switch powerMaximal switch voltageMaximal switch current30VDC 2A, 125VAC 1A125VA 160W250VAC, 220VDCIsolation Homo-polarity interface 1000VAC 1minuteInhomo-polarity interfaceInterface and winding1A1000VAC 1 minute1000VAC 1 minuteSurge voltage Homo-polarity 1500VAC (10×160us)Turn-on timeTurn-off time3ms max3ms maxlongevity Mechanical 50×106 MIN (3Hz)Environment temperatureElectric2.9 Speed dome connections-40~+70 o C200×103 MIN (0.5Hz)1. Connect the 485 lines of the speed dome with the DVR 485 interface.R4852. Connect the video line with the DVR video input.3. Connect the speed dome to a power supply.Note: The speed dome A, B port and the DVR A, B port should be a correspondingconnection, A is +, B is -13
Page 1 and 2: ATLANTIS 321 U32 ChannelDVRUser’s
Page 3 and 4: Directory1 Welcome ................
Page 5 and 6: 1. WelcomeThank you for purchasing
Page 7 and 8: 5). Connect SATA data wire 6). Conn
Page 9 and 10: Serial NO Key Mark Function16 Playb
Page 11: 2.7.4 Audio signal outputCommonly t
Page 15 and 16: Picture 3.1 System LoginPassword pr
Page 17 and 18: 3.5.2 PlaybackThere are two methods
Page 19 and 20: Button Function Button Function/ Pl
Page 21 and 22: Speed: Set the PTZ rotation range.
Page 23 and 24: 3: ScanThe PTZ can also work on the
Page 25 and 26: Picture 3.18 Color Setting3.5.7 Out
Page 27 and 28: Main menu Sub menu FunctionManageme
Page 29 and 30: Manual: No matter what the present
Page 31 and 32: (Period) Trigger the motion detect
Page 33 and 34: 4.3.4 Alarm inputWhen the system ge
Page 35 and 36: 4.4.2 Encode setupSet the video/aud
Page 37 and 38: (PPPoE setup)Picture 4.19 PPPOEInpu
Page 39 and 40: (DDNS) (dynamic domain name server)
Page 41 and 42: (Enable) Select this to make sure t
Page 43 and 44: 4.4.6 PTZ setupPicture 4.29 PTZ set
Page 45 and 46: 4.5.2 AccountManage the user purvie
Page 47 and 48: 4.5.3 Online UserLook up the networ
Page 49 and 50: Clue: means that the hard disk is
Page 51 and 52: 5 FAQ and maintenance5.1 FAQIf your
Page 53 and 54: 11). The DVR can not control the PT
Page 55 and 56: 21). The storage time is not enough
Page 57 and 58: Appendix 3.Technique parametersType

Atlantis 32 Channel Manual - Qvis Security

Create successful ePaper yourself

Delete template?

Save as template?