Atlantis 32 Channel Manual - Qvis Security

2 Initial check and cable connections2.1 Initial checkWhen you first receive your DVR, please check the following:1. Please check whether there is any visible damage to the packageappearance. The protective materials used for the package of the DVR canprotect the DVR against most accidental damage during transportation.2. Please open the box and get rid off the plastic protective materials. Checkwhether there is any visible damage to the DVR itself.3. Please open the machine crust and check the data wire in the front panel,power wire and the connection between the fan power and the main board.Front and rear panel• The key functions on the front panel and the interface specification for thereal panel are in the specification.• Please check the product type described on the front panel whether is theproduct type you ordered.The label on the real panel is very important for after sales service. Pleaseprotect it carefully. If you have to contact us for after sales service, pleaseprovide the product type and serial number from this label.2.2 Hard disk installationBefore you first use the DVR, please install the hard disk as follows:-1). Undo the side screws 2). Lift off the cover3). Screw on the hard disk 4). Screw on the hard disk6