Atlantis 32 Channel Manual - Qvis Security

More documents

Recommendations

Info

(Send EMAIL) means sending an email to the user when the alarm is turned on.Note: Set in the [NetService] and send email.4.3.2 Video BlindWhen the video image is influenced by environmental factors such as excessivebrightness or reaching the set sensitivy parameter, the camera mask function andthe linkage function are turned on.Picture 4.9 Video BlindSet method: refer to chapter 4.3.1. Motion detectNote: "Advanced" button is the same as right-click.4.3.3 Video LossWhen the equipment can not obtain the channel video signal, the video lossalarm is turned on and the linkage function is turned on.Picture 4.10 Video lossSet method: refer to chapter 4.3.1. Motion detectNote: "Advanced" button is the same as rightclick.<strong>32</strong>
4.3.4 Alarm inputWhen the system gets an external alarm signal, the alarm function is turned on.Picture 4.11 Alarm inputSet method: refer to chapter 4.3.1. Motion detectNote:"Advanced" button is the same as right-click.4.3.5 Alarm output4.3.4 AbnormalRefer to chapter 3.5.4.Analysing and inspecting current software and hardware of the device: Whensome abnormal events happen, the device will make a relative explanation suchas show a message and sound a buzzer.Picture 4.12 Abnormal(Event Type) Selecting the abnormity you want to inspect(Enable) Select it to make sure the abnormal function works(Show message) Automatically an alarm cue dialog box comes up on the mainscreen(Buzzer) The device will have a “di di” noise when the alarm is sounding33
Page 1 and 2: ATLANTIS 321 U32 ChannelDVRUser’s
Page 3 and 4: Directory1 Welcome ................
Page 5 and 6: 1. WelcomeThank you for purchasing
Page 7 and 8: 5). Connect SATA data wire 6). Conn
Page 9 and 10: Serial NO Key Mark Function16 Playb
Page 11 and 12: 2.7.4 Audio signal outputCommonly t
Page 13 and 14: 2.8.3 Alarm output port relay param
Page 15 and 16: Picture 3.1 System LoginPassword pr
Page 17 and 18: 3.5.2 PlaybackThere are two methods
Page 19 and 20: Button Function Button Function/ Pl
Page 21 and 22: Speed: Set the PTZ rotation range.
Page 23 and 24: 3: ScanThe PTZ can also work on the
Page 25 and 26: Picture 3.18 Color Setting3.5.7 Out
Page 27 and 28: Main menu Sub menu FunctionManageme
Page 29 and 30: Manual: No matter what the present
Page 31: (Period) Trigger the motion detect
Page 35 and 36: 4.4.2 Encode setupSet the video/aud
Page 37 and 38: (PPPoE setup)Picture 4.19 PPPOEInpu
Page 39 and 40: (DDNS) (dynamic domain name server)
Page 41 and 42: (Enable) Select this to make sure t
Page 43 and 44: 4.4.6 PTZ setupPicture 4.29 PTZ set
Page 45 and 46: 4.5.2 AccountManage the user purvie
Page 47 and 48: 4.5.3 Online UserLook up the networ
Page 49 and 50: Clue: means that the hard disk is
Page 51 and 52: 5 FAQ and maintenance5.1 FAQIf your
Page 53 and 54: 11). The DVR can not control the PT
Page 55 and 56: 21). The storage time is not enough
Page 57 and 58: Appendix 3.Technique parametersType

Atlantis 32 Channel Manual - Qvis Security

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?