KENWOOD TH-78A 144/440 MHz Dual Bander - The Repeater ...

5) To transmit, press the PTT switch. The DTSS code is sent for about 0.5 second.NoteVoice output is muted during code output.We recommend that you turn off the batterysaver function when you use DTSS.6) Press the F key, then press the 2 key to cancel the DTSS function.NoteAlthough you can select the CTCSS functionsimultaneously in both band, an incoming DTSScode may be lost at certain timings.3 Using DTSS with a RepeaterPressing the PTT switch transmits the DTSS signal after a short delay. The delay helps avoid any malfunction thatmight be caused when the repeaters switching times interrupt the DTSS signal.The normal delay time is 250 milliseconds. When using shift or split channel operation, the delay time is 450milliseconds. You can change the delay time to 250 milliseconds.To Change Delay Time1) Turn the power off.2) Press and hold the 1 key.3) Turn the power on.4) Release the 1 key.PAGINGPaging uses a DTMF (Dual Tone Multi Frequency) signal and is useful in calling members of a group, a specificstation, or for waiting for a call from another station.You should determine the common group paging code and individual codes in advance. You can enter three-digitcodes from 000 to 999.Page 30