KENWOOD TH-78A 144/440 MHz Dual Bander - The Repeater ...

More documents

Recommendations

Info

2 Tuning Control and Volume ControlThis transceiver assigns two volume and tuning control functions to the two controls on the top of the radio.Before proceeding to the next step, master these functions. The default setting is as follows:Functions as thevolume control forthe UHF band.Functions as thetuning control ofThe UHF band.You can control the band forWhich the PTT indicator lights.When you press the BAND key, control of each function is transferred to the VHF band.The inside knob of the LEFT control functions as the VOLUME control for the selected band, and the inside knobof the RIGHT control functions as the TUNING control for the selected band.You can control the selected BAND for which the PTT indicator lights by pressing the BAND button immediatelyabove the LCD display. Each time the BAND button is pressed, PTT control switches between VHF and UHF.When you press and hold the E.CHG key (or within two seconds of pressing the E.CHG key), control of the volumeand tuning (using the same controls as above) temporarily passes to the uncontrolled band.We recommend that you use this function in order to temporarily change the volume or frequency of the normallyuncontrolled band.Page 8
Separate VOLUME control functionPress the F key then press the E.CHG key.Functions as thevolume control forthe VHF band.Functions as thevolume control ofThe UHF band.The inside knob of the LEFT control functions as the VOLUME control for the VHF band, and the inside knob ofthe RIGHT control functions as the VOLUME control for the UHF band.VHF BANDSeparate TUNING control functionThis indicates the volume levelUHF BANDWhile operating in the separate volume control mode, press the F key then press the E.CHG key.Functions as thetuning control forthe UHF band.Functions as thetuning control ofThe UHF band.The inside knob of the LEFT control functions as the TUNING control for the VHF band, and the inside knob ofthe RIGHT control functions as the TUNING control for the UHF band.Returning to the original modePress the F key for longer than one second and then press the E.CHG key.Whenever you are selecting frequencies, your first step should be to set the squelch control. The squelch helps toeliminate 'white noise' or static until you receive active communications on a frequency.There are two squelch controls, one for the VHF band (outside knob of left control), and one for the UHF band(outside knob of right control). To set the squelch controls:Page 9
Page 1 and 2: KENWOODTH-78A144/440MHz FM Handheld
Page 3 and 4: 9 CALL/VFO Scan ...................
Page 5 and 6: CONTROLS OVERVIEWPage 5
Page 7: Manganese or Alkaline batteriesFull
Page 11 and 12: 5) The transceiver actually changes
Page 13 and 14: 3) Select the desired upper tuning
Page 15 and 16: The time-out-timer function cannot
Page 17 and 18: 3) Use the keypad to select any des
Page 19 and 20: 3) Press the M key, then press the
Page 21 and 22: 4 Scanning Memory ChannelsNoteThe t
Page 23 and 24: 8 VFO / Memory ScanThis function le
Page 25 and 26: For example, repeater A uses 146.00
Page 27 and 28: 3) Release the 2 key.You are now ab
Page 29 and 30: The desired band will now operate i
Page 31 and 32: Unlike DTSS, the calling station co
Page 33 and 34: 4 Sending Pages (Calling)1) Turn to
Page 35 and 36: 3) Press the PTT switch to respond
Page 37 and 38: Relationship between input characte
Page 39 and 40: Press and hold the M key for longer
Page 41 and 42: 3) Connect your earphone to the Ext
Page 43 and 44: 1) Turn the POWER switch off2) Pres
Page 45 and 46: 2 With the Tuning control, set the
Page 47 and 48: DTMF2SEARMSG M1MSG MXMSGCLROPG OFFO
Page 49 and 50: 1. Installing the CTCSS Unit (TSU-7
Page 51 and 52: To reset the function of the transc

KENWOOD TH-78A 144/440 MHz Dual Bander - The Repeater ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?