KENWOOD TH-78A 144/440 MHz Dual Bander - The Repeater ...

4 Sending Pages (Calling)1) Turn to the predetermined frequency.2) Press the F key then press the 1 key to enter the Paging mode. The Paging function of the other transceivermust also be on.3) Press and hold the F key for longer than one second, then press the 1 key to enter the code setting mode.4) Use the tuning control to select the memory channel where the local station code is storedCalling All Group MembersSelect the group code memory channel to call all members of a group. In the example below, the group code isstored in channel 5.Press the PTT switch. Communication is possible in both the Paging and code setting mode.The group code 789 and your station ID code 111 are transmitted.Calling a Specific Group MemberUse the following procedure to call a specific group member:1) Select the local station code memory. In this example, we have selected memory 3.2) If the local station code is not in memory, enter it in memory 0.3) Press the PTT switch.Page 33