KENWOOD TH-78A 144/440 MHz Dual Bander - The Repeater ...

2 Tuning Control and Volume ControlThis transceiver assigns two volume and tuning control functions to the two controls on the top of the radio.Before proceeding to the next step, master these functions. The default setting is as follows:Functions as thevolume control forthe UHF band.Functions as thetuning control ofThe UHF band.You can control the band forWhich the PTT indicator lights.When you press the BAND key, control of each function is transferred to the VHF band.The inside knob of the LEFT control functions as the VOLUME control for the selected band, and the inside knobof the RIGHT control functions as the TUNING control for the selected band.You can control the selected BAND for which the PTT indicator lights by pressing the BAND button immediatelyabove the LCD display. Each time the BAND button is pressed, PTT control switches between VHF and UHF.When you press and hold the E.CHG key (or within two seconds of pressing the E.CHG key), control of the volumeand tuning (using the same controls as above) temporarily passes to the uncontrolled band.We recommend that you use this function in order to temporarily change the volume or frequency of the normallyuncontrolled band.Page 8