Mitutoyo1001 Catalog.pdf - JW Donchin CO.

VM-ZOOM40SERIES 378 — Assembly Type Microscope UnitThe VM-ZOOM40 is an assembly typemicroscope unit that has drastically improvedoperability and the quality of visual imagesby combining the main unit, which has ahigh-magnification zooming system, with anewly developed high-resolution objective,which has a long working distance. If the VM-ZOOM40 is used with an analysis prober andvarious other laser repair equipment, it willgreatly aid in development, manufacturing,and inspection of semiconductors and LCDpanels.SPECIFICATIONSTotal magnification 1/2-inch CCD cameraand 14-inch monitor)Magnification of tube (Zoom ratio 1:40)ObjectiveField of view2.56x1.92mm - 0.064x0.048mmReflected illumination stop) Power zoom type.for the manual zoom type.Light source Halogen bulb (21V, 150W)Focusing unitConcentric coarse and finewheelsPower supply20Lx (min.) on the screenMassMain unit: Approx. 7kgBinocular unit: 1kgRemote controller unit: Approx.7kgFEATURESoperability.standard.attachable.change between the monitoring and laserbeam cutting objectives.near ultraviolet, ultraviolet) laserssupported.selectable according to the purpose.Selection Guide of System ConfigurationOrder No.(Depends on each systemconfiguration)378-182A378-181A378-178A378-177A378-176A378-175A378-174A378-173A378-172A378-171AManual zoom function ● ● ● ●Power zoom function ● ● ● ● ● ● Fiber-optic illumination controller is also provided.Single-objective mount ● ●Double-objective mount● ● ● ● ● ● ● ●RemarksThe objective can be switched due to the slidingmechanism.Binocular unit ● ● ● ● ● ● ● ● ● ● ●Focusing unit ● ● ● ● ● ● ● ● ● ●CCD camera mount ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●●: Included in the set.US-1001I-33