Mitutoyo1001 Catalog.pdf - JW Donchin CO.

LEGEXSERIES 356 — Ultra-high Accuracy CNC CMMAchieving premium performance, the fixedbridge structure and precision air bearingsresting on the rigid guideways ensuresuperior stability of motion and ultra-highmeasuring accuracy. It is suitable for complexsmall to medium size workpieces such as agear, bearing, lens, die, or scroll rotor whichrequire high dimensional accuracy. The MPP-300Q probe adds a scanning function to thestandard point-to-point measurement.LEGEX 322FEATURESis made possible by rigorous analysis ofall possible error-producing factors andelimination or minimization of their effects.crystallized glass scale with ultra-lowexpansion coefficient of 0.01x10 -6 / C is usedon each axis.bearings* running on highly rigid guidewaysensure superior motion stability and ultrahighgeometrical accuracy.touch-trigger probes, laser scanning probes,and a vision measuring probe are available.*Linear bearing: LEGEX 322Mitutoyo original standardtype glass scale (above) andultra-high accuracy glassscale with virtually zerothermal expansion (below)CMM calibration tool usingthe virtually zero thermalexpansion glass gageTechnical DataLength standard: Ultra high accuracy linear encoder(glass scale with virtually zero thermalexpansion coefficient)Guide system: Air bearing (linear guide: LEGEX 322)Max. drive speed: 200mm/secMax. acceleration: 0.1G (0.085G: LEGEX 322)Air pressure: 0.4MPa (0.5MPa: LEGEX 9106,No Air: LEGEX 322)Air consumption: 120L/minGuaranteed accuracy temperature environment*Temperature range68.0˚F±3.6˚F (20±2°C)Temperature change Per hour 0.5KPer 24 hours 1.0KTemperature gradient Vertical 1.0K/mHorizontal 1.0K/mSPECIFICATIONSModel No. LEGEX 322 LEGEX 574 LEGEX 774 LEGEX 776 LEGEX 9106 LEGEX 12128Range X-axis 11.81” (300mm) 20.07” (510mm) 27.95” (710mm) 27.95” (710mm) 35.82” (910mm) 47.63” (1210mm)Y-axis 7.87” (200mm) 27.95” (710mm) 27.95” (710mm) 27.95” (710mm) 39.76” (1010mm) 47.63” (1210mm)Z-axis 7.87” (200mm) 17.91” (455mm) 17.91” (455mm) 24.01” (610mm) 24.01” (610mm) 31.69” (805mm)Resolution.0000004” (0.00001mm)Accuracy* MPEE (0.8+2L/1000)μm (0.35+L/1000)μm (0.6+1.5L/1000)μmMPEP 1μm 0.45μm 0.6μmMPETHP — 1.4μm 1.8μmMPTTHP — 150 SECWork table Material Steel Cast ironCast ironCast ironCast ironCast iron(Ceramic coating optional) (Ceramic coating optional) (Ceramic coating optional) (Ceramic coating optional) (Ceramic coating optional)Size 15.71” x 10.67”(399mm x 271mm)21.65” x 29.52”(550mm x 750mm)29.52” x 29.52”(750mm x 750mm)37.40” x 41.33”(950mm x 1050mm)49.21” x 49.21”(1250mm x 1250mm)Tapped insertM8 x 1.25mmWorkpiece Max. height 8.27” (210mm) 27.8” (706mm) 27.4” (696mm) 34.13” (867mm) 33.89” (861mm) 41.57” (1056mm)Max. load 33 lbs (15kg) 551 lbs (250kg) 1102 lbs (500kg) 1763 lbs (800kg) 2205 lbs (1000kg)Mass (main unit) 573 lbs (260kg) 7716 lbs (3500kg) 11023 lbs (5000kg) 11243 lbs (5100kg) 14330 lbs (6500kg) 23148 lbs (10500kg)Dimensions (W x D x H) 30.87 x 34.49 x 38.17”(784 x 876 x 970mm)w/o stand62.44 x 100.00 x 102.16”(1586 x 2540 x 2595mm)LEGEX 1212878.07 x 102.20 x 101.77”(1856x 2596 x 2585mm)* When using temperature compensation system.ISO10360-2: 2001 & 10360-4, Probe system used: MPP-300Q (TP7M: LEGEX 322), L: Measuring length (mm)78.07 x 102.20 x 113.58”(1856 x 2596 x 2885mm)This machine incorporates a startup system (relocationdetection system), which disables operation whenan unexpected vibration is applied or the machine isrelocated. Be sure to contact your nearest Mitutoyoprior to relocating this machine after initial installation.80.94 x 125.98 x 119.29”(2056 x 3200 x 3030mm)92.75 x 142.59 x 141.33”(2356 x 3622 x 3590mm)L-4US-1001