Mitutoyo1001 Catalog.pdf - JW Donchin CO.

QV-Index Head*Automatic multi-plane measurement is possiblewith the optional index table.Accessories for Quick VisionObjective Objective Order No. WorkingdistanceQV-SL0.5X 02AKT199 30.5mm 02AKT250 40.6mmQV-SL1X 02ALA150 52.5mm 02AKT300 40.6mmQV-SL2.5X 02ALA170 60mmQV-5X 02ALA420 33.5mmQV-10X 02ALG010 30.5mmQV-25X 02ALG020 13mmThe monitor magnification and field of view valuesare for the PRO machine.QV-10X, QV-25X: Depending on a workpiece ofillumination may be insufficient at a turret lensmagnification of 2X and 6X.QV-25X: The PRL illumination is restricted in itsusable position.Objective Turret lens Monitor mag. View Fieldmag. mag.0.5X 1X 16X 12.54 x 9.402X 32X 6.27 x 4.706 96 1X 1X 32X 6.27 x 4.702X 64X 3.13 x 2.356 192 2.5X 1X 80X 2.50 x 1.882X 160X 1.25 x 0.946X 5X 1X 160X 1.25 x 0.942X 320X 0.62 x 0.47 10X 1X 320X 0.62 x 0.472X 640X 0.31 x 0.23 25X 1X 800X 0.25 x 0.182X 1600X 0.12 x 0.096 A calibration chart is used to compensate for thepixel size of the CCD chip, autofocus accuracyand the optical axis offset at each magnificationof the variable magnification unit (PPT).Max. workpiece diameter 5.51” / 140mmMax. workpiece mass4.41 lbs / 2kgMin. rotation angle 0.1°Positioning accuracy ±0.5°Max. rotation speed10rpmThe color filtering function can be added to thering light in Quick Vision models that use ahalogen light source. This function enhancescolored workpieces, facilitating edge detection.This function can also be retrofitted to aconventional Quick Vision. In addition, a yellowfilter enables vision measurement in the yellowlight region, which provides high sensitivity.The system can be equipped with a Laser AutoFocus unit that allows a stable, high-speed heightmeasurement during high-speed travel. Thisunit provides stable measurement results withminimum dependence on surface inclination sincethe double pinhole method is adopted in thedetection system.ObjectiveMeasurement principleLaser spot diameterRepeatabilityQV2.5XDouble pinhole method3μmσ = 0.4μmRed filter usedExample: Height of leads from a QFP packageSafety Precautions against Laser BeamThis system uses a low-power visible laser beam whichcorresponds to a CLASS 1 (visible light) of IEC 60825 formeasurement. The CLASS 1 laser warning label as shown right isattached to the main unit.CLASS 1 LASER PRODUCT* Accessories for Quick Vision Series only† Accessories for Quick Vision and Quick Scope SeriesUS-1001M-7