Mitutoyo1001 Catalog.pdf - JW Donchin CO.

Optional Accessories for Automatic MeasurementCompatible with CV-3100, CV-4100 and CNC ModelsY-axis table*: 178-097Enables efficient, automatic measurement of multiplealigned workpieces and multiple points on a singlemeasurement surface.* available as a factory set accessory for CNC model.θ1-axis table: 12AAD975*For efficient measurement in the axial/transversedirections. When measuring a cylindrical workpiece,automatic alignment can be performed in combinationwith the Y-axis table.*θ1-axis mounting plate (12AAE630) is required when directlyinstalling on the base of the SV-3100.Examples of optimal combinations ofaccessories for CNC modelsOptional accessoryY-axisTableθ1 Tableθ2 TableTravel rangeResolutionPositioning accuracyDrive speedMaximum loadMass7.87”(200mm)1.97μin (0.05μm)±3μmMax. 3.15”/s (80mm/s)110 lbs (50kg)61.7 lbs (28kg)θ2-axis table: 178-078*You can measure multiple points on a cylindricalworkiece and automate front/rear-side measurement.*θ2-axis mounting plate (12AAE718) is required when directlyinstalling on the base of the SV-3100.Displacement 360°Resolution 0.004°Maximum load26.5 lbs (12kg)Rotational speed Max. 10°/sMass15 lbs (7kg)Quick chuck: 211-032This chuck is useful when measuring small workpieces.You can easily clamp them with its knurled ring.FunctionAutomatic alignment(Patented : Japan)Multiple workpiece batchmeasurementMultiple-piece measurementin the Y-axis direction(Positioning in the Y-axisdirection)Multiple-piece measurementin the radius direction(Positioning in the rotatingdirection of XY plane)Tracking measurement in theZ-axis direction *Inclined surface measurementin the X-axis directionInclined hole insidemeasurement in the X-axisdirectionMultiple cylinder generatrixline measurementMeasurement of both topand bottom surfacesRotary positioning of largeworkpiece **Upward/downward andfrontward/backwardmeasurement of largeworkpiece **● ● —▲ — —● — —▲ ● —— — —▲ — —▲ — —▲ — ●▲ — ●— — —— — —* : Applicable only to form/contour measurement** : Applicable only for SV-M3000CNCRetentionrangeDimensionsMassInner latchInner latchOuter latchOD: ø 0.04” - 1.42” (1 - 36mm)ID: ø 0.55” - 2.76” (14 - 70mm)OD: ø 0.04” - 2.95” (1 - 75mm)ø 4.65” x 1.61” (118 x 41mm)2.65 lbs (1.2kg)Displacement 360°Resolution 0.0072°Maximum load(loading moment)Rotational speedMax. 18°/sMass11 lbs (5kg)Micro-chuck: 211-031This chuck is suitable for clamping extra-smalldiameter workpieces (ø1 mm or less), which cannotbe retained with the centering chuck.Retention rangeDimensionsMassOD: ø 0-0.06”(0 - 1.5mm)ø 4.65” x 1.9” (118 x 48.5mm)1.32 lbs (0.6kg)J-38US-1001