Mitutoyo1001 Catalog.pdf - JW Donchin CO.

Roundtest ExtremeRA-2200CNC / RA-H5200CNCSERIES 211 — CNC Roundness / Cylindricity Measuring SystemMitutoyo offers innovative roundness/cylindricity measuring systems capable ofautomated measurement with independent/simultaneous multi-axis CNC control.In addition to high measuring accuracyand reliability, these CNC models provideexcellent inspection productivity.Roundness and surface roughnessmeasurements are both available froma single measuring system so workpieceresetting for roughness measurement isnot required. Roughness measurement ispossible in the axial and circumferentialdirections.RA-H5200H CNCwith personal computersystem and softwareJ-52Holder-arm orientation switching (vertical position -horizontal position)Detector rotation mechanism (0 to 290°, in increments of 1°)RA-2200H CNCwith personal computersystem and software* Shown with optionalvibration isolator and sidetable for PC.* Shown with optionalside table for PC.US-1001Technical Data: RA-2200CNCTurntableRotational accuracy (radial): (.8+.35H)μin {(0.02+3.5H/10000)μm}Rotational accuracy (axial): (.8+.35X)μin {(0.02+3.5X/10000)μm}H: Probing height (mm), X: Distance from the turntable axis (mm)Rotating speed: 2, 4, 6, 10rpmTable top diameter: ø 9.25” (235mm)Centering range: ±3mmLeveling range: ±1°Maximum probing diameter: ø 10.1” (256mm)Maximum workpiece diameter: ø 22.8” (580mm)Maximum workpiece weight: 66 lbs (30kg)Vertical column (Z-axis)Vertical travel: 11.8” (300mm) 19.7” (500mm): 2200H model)Straightness (λc2.5): 0.10μm / 100mm, 0.15μm / 300mm(0.25μm / 500mm: 2200H model)Parallelism with rotating axis: 0.7μm / 300mm(1.2μm / 500mm: 2200H model)Positioning speed: Max. 50mm/sMeasuring speed: 0.5, 1, 2, 5mm/sMaximum probing height: 11.8” (300mm) (OD / ID)[19.7” (500mm) (OD / ID): 2200H model]Maximum probing depth: over ø32: 104mm (w/standard stylus)over ø12.7: 26mm (w/standard stylus)Horizontal arm (X-axis)Horizontal travel:6.9” (175mm) (Including a protrusion of1” (25mm) the turntable rotation center)Straightness (λc2.5): 0.7μm / 150mmSquareness with rotating axis: 1.0μm / 150mmPositioning speed: Max. 30mm/sMeasuring speed: 0.5, 1, 2, 5mm/sProbe and stylusMeasuring range: ±400μm/±40μm/±4μm (±5mm: tracking range)Measuring force: 40mN (in 5 steps)Standard stylus: 12AAE301, carbide ball, ø1.6mmMeasuring direction: one directionStylus angle adjustment: ±45° (with graduations)Air supplyAir pressure: 390kPa (4kgf/cm 2 )Air consumption:Power supply:Dimensions (W x D x H):26.3 x 20 x 35.4”(667 x 510 x 900mm)26.3 x 20 x 43.3”Mass:30L/min.100V AC – 240V AC, 50/60Hz(667 x 510 x 1100mm: 2200H model)397 lbs (180kg) 441 lbs (200kg): 2200H model)Technical Data: RA-H5200CNCTurntableRotational accuracy (radial): (.8+.35H)μin {(0.02+3.5H/10000)μm}Rotational accuracy (axial): (.8+.35X)μin {(0.02+3.5X/10000)μm}H: Probing height (mm), X: Distance from the turntable axis (mm)Rotating speed: 2, 4, 6, 10rpm (20rpm: auto-centering)Table top diameter: ø300mmCentering range: ±5mmLeveling range: ±1°Maximum probing diameter: ø14” (356mm)Maximum workpiece diameter: ø 26.8” (680mm)Maximum workpiece weight: 176 lbs (80kg)143 lbs (65kg): auto-centeringVertical column (Z-axis)Vertical travel: 13.7” (350mm) 21.7” (550mm): H5200H modelStraightness (λc2.5): 0.05μm / 100mm, 0.14μm / 350mm(0.2μm / 550mm: H5200H model)Parallelism with rotating axis: 0.2μm / 350mm(0.32μm / 550mm: H5200H model)Positioning speed: Max. 60mm/sMeasuring speed: 0.5, 1, 2, 5mm/sMaximum probing height: 13.7” (350mm) (OD / ID)[21.7” (550mm) (OD / ID): H5200H model)Maximum probing depth: over ø32: 104mm (w/standard stylus)over ø12.7: 26mm (w/standard stylus)Horizontal arm (X-axis)Horizontal travel: 8.8” (225mm)Straightness (λc2.5): 0.4μm / 200mmSquareness with rotating axis: 0.5μm / 200mmPositioning speed: Max. 50mm/sMeasuring speed: 0.5, 1, 2, 5mm/sProbe and stylusMeasuring range: ±400μm (±5mm: tracking range)Measuring force: 40mN (in 5 steps)Standard stylus: 12AAE301, carbide ball, ø1.6mmMeasuring direction: one directionStylus angle adjustment: ±45° (with graduations)Air supplyAir pressure: 390kPa (4kgf/cm 2 )Air consumption: 45L/min.Power supply: 100V AC – 240V AC, 50/60HzDimensions (W x D x H): 49.6 x 28.0 x 66.9”(1260 x 710 x 1700mm)49.6 x 28.0 x 74.8”(1260 x 710 x 1900mm: H5200H model)Mass: Main unit: 1433lbs. (650kg)1477lbs (670kg): H5200H (model)Vibration isolator: 375lbs (170kg)