Mitutoyo1001 Catalog.pdf - JW Donchin CO.

150-801150-191Technical DataGraduations: 0.01mm, 0.001mm, .001" or .0001"Spindle pitch: 0.5mmspherical, lapped surfaceScale surface: Hard-chrome platingFixture thickness for clamp nut: 11.5mmMicrometer HeadsSERIES 150 — Common Type in Middle SizeFEATURESSPECIFICATIONSMetricRange Order No.0 - 25mm 150-1920 - 25mm 150-1910 - 25mm 150-2090 - 25mm 150-2100 - 25mm 150-8010 - 25mm 150-8020 - 25mm 150-8210 - 25mm 150-8220 - 25mm 150-1900 - 25mm 150-1890 - 25mm 150-1960 - 25mm 150-1950 - 25mm 150-2110 - 25mm 150-2120 - 25mm 150-2190 - 25mm 150-220*with spindle lockAccuracy Stem dia. Stem Spindle face Remarks 10mm Plain — 10mm — 10mm Plain* — 10mm — 10mm Plain — 10mm — 10mm Plain Reverse reading 10mm Reverse reading 10mm Plain 10mm 10mm Plain* 10mm 10mm Plain* 10mm 10mm Plain Flat Long spindle 10mm Flat Long spindleInchRange Order No. Accuracy Stem dia. Stem Spindle face Remarks0 - 1" 150-208 ±.0001" .375" Plain —0 - 1" 150-198 ±.0001" .375" Plain 0 - 1" 150-207 ±.0001" .375" —0 - 1" 150-197 ±.0001" .375" 0 - 1" 150-213 ±.0001" .375" Plain* —0 - 1" 150-214 ±.0001" .375" —0 - 1" 150-811 ±.0001" .375" Plain —0 - 1" 150-812 ±.0001" .375" —0 - 1" 150-831 ±.0001" .375" Plain Reverse reading0 - 1" 150-832 ±.0001" .375" Reverse reading0 - 1" 150-206 ±.0001" .375" Plain 0 - 1" 150-205 ±.0001" .375" 0 - 1" 150-215 ±.0001" .375" Plain* 0 - 1" 150-216 ±.0001" .375" 0 - 1" 150-217 ±.0001" .375" Plain* 0 - 1" 150-218 ±.0001" .375" 0 - 1" 150-221 ±.0001" .375" Plain Flat Long spindle0 - 1" 150-222 ±.0001" .375" Flat Long spindle*with spindle lockDIMENSIONS AND MASS.375” (Inch)0 ø10 -0.009 (Metric)ø6.354ø6.35ø1815(17)67171542(92)ø20ø18ø14.375” (Inch)0 ø10 -0.009 (Metric)Unit: mmø18M9.5x0.5(17)671742(92)150-192 / 150-208 95g150-191 / 150-207 100gø6.35.375” (Inch)0 ø10 -0.009 (Metric)ø6.35ø144.375” (Inch)0 ø10 -0.009 (Metric)ø20ø181517(17)78.542(103.5)150-209 / 150-213 110gM9.5x0.5 1517(17)78.542(103.5)150-210 / 150-214 115g( ): when retracting the spindle until its stroke end.US-1001B-65