Mitutoyo1001 Catalog.pdf - JW Donchin CO.

Optional Accessories for Automatic MeasurementCompatible with SV-3100, SV-C3100, SV-C4100, CS-3200 and CNC ModelsExamples of optimal combinations ofaccessories for CNC modelsOptional accessory Y-axis θ1 TableTableθ2 TableY-axis table*: 178-097Enables efficient, automatic measurement of multiplealigned workpieces and multiple points on a singlemeasurement surface.* available as a factory set accessory for CNC model.Travel rangeResolutionPositioning accuracyDrive speedMaximum loadMass8” (200mm)1.97μin (0.05μm)±3μmMax. 3.15”/s (80mm/s)110 lbs (50kg)62 lbs (28kg)θ2-axis table: 178-078*You can measure multiple points on a cylindricalworkpiece and automate front/rear-side measurement.* θ2-axis mounting plate (12AAE718) is required when directlyinstalling on the base of the SV-3100.θ1-axis table: 12AAD975*For efficient measurement in the axial/transversedirections. When measuring a cylindrical workpiece,automatic alignment can be performed in combinationwith the Y-axis table.* θ1-axis mounting plate (12AAE630) is required when directlyinstalling on the base of the SV-3100.Displacement 360°Resolution 0.004°Maximum load26.5 lbs (12kg)Rotational speedMax. 10°/sMass15 lbs (7kg)Auto-leveling table: 178-087This is a stage that performs fully automatic levelingas measurement starts, freeing the user from thistroublesome operation. Fully automatic leveling canbe done quickly by anyone. In addition, the operationis easy and reliable.FunctionAutomatic leveling — — —Automatic alignment (Patentregistered: Japan)● ● —Multiple workpiece batchmeasurement▲ — —Measurement in the Y-axisdirection● — —Oblique measurement of XYplane **● — —Outside 3D surface roughnessmeasurement/evaluation **● — —Multiple-piece measurementin the Y-axis direction(Positioning in the Y-axis● — —direction)Multiple-piece measurementin the radius direction(Positioning in the rotating▲ ● —direction of XY plane)Tracking measurement in theZ-axis direction *— — —Inclined surface measurementin the X-axis direction▲ — —Inclined hole insidemeasurement in the X-axis ▲ — —directionMultiple cylinder generatrixline measurement▲ — ●Measurement of both topand bottom surfaces▲ — ●Rotary positioning of largeworkpiece ***— — —Upward/downward andfrontward/backwardmeasurement of largeworkpiece ***— — —* : Applicable only to form/contour measurement** : Applicable only to surface roughness measurement*** : Applicable only for SV-M3000CNCDisplacement 360°Resolution 0.0072°Maximum load(loading moment)8.8 lbs (4kg)Rotational speedMax. 18°/sMass11 lbs (5kg)Quick chuck: 211-032This chuck is useful when measuring small workpieces.You can easily clamp them with its knurled ring.Inclination adjustment angle ±2°Maximum load15 lbs (7kg)Table dimensions5.1” x 3.9”(130 x 100mm)Mass7.7 lbs (3.5kg)Micro-chuck: 211-031This chuck is suitable for clamping extra-smalldiameter workpieces (ø1mm or less), which cannot beretained with the centering chuck.RetentionrangeDimensionsMassInner latchInner latchOuter latchOD: ø 0.04” - 1.42” (1 - 36mm)ID: ø 0.55” - 2.76” (14 - 70mm)OD: ø 0.04” - 2.95” (1 - 75mm)ø 4.65” x 1.61” (118 x 41mm)2.6 lbs (1.2kg)Retention rangeDimensionsMassOD: ø 0 - 0.06” (0 - 1.5mm)ø 4.65” x 1.9” (118 x 48.5mm)1.3 lbs (0.6kg)J-28US-1001