Mitutoyo1001 Catalog.pdf - JW Donchin CO.

Contracer Extreme CV-3000CNC / CV-4000CNCSERIES 218 — CNC Contour Measuring InstrumentsFEATURESmeasuring instrument.speed of 200 mm/s, which permits highspeedpositioning that may result in a largeincrease in the throughput of multipleprofile/ multiple-workpiece measurementtasks.α-axis, it is possibleto perform continuous measurement overhorizontal and inclined surfaces by powertiltingthe X1 axis.is equipped with a Laser Hologagedetector giving excellent narrow/widerange accuracy and resolution in the Z axis(vertical).Principle of OperationCV-3000CNC with personalcomputer system and software* PC stand not includedpossible to expand the measuring rangefor multiple workpieces, etc., throughpositioning in the Y-axis direction.through 2-axis simultaneous control in theX- and Y-axis directions.anti-collision safety device, the detectorunit will automatically stop even if its mainbody collides with a workpiece or jig.Box, which the user can make anymovement by selecting the required axisusing the two joysticks. The current axisselection is easily identified by the icon onthe key top.Analysis section is via USB.Technical DataX1-axisMeasuring range: 8" (200mm)Resolution: 1.97 μin (0.05μm)Measurement method: Reflective-type linear encoderDrive speed: Max. 200mm/s (CNC)0 - 2"/s (0 - 50mm/s) (joystick)Measuring speed: 0.0008 - 0.08"/s (0.02 - 2mm/s)Measuring direction: Push/PullTraverse linearity:80μin/8” (2μm/200mm)*with the X axis in horizontal orientationLinear displacement accuracy (at 20°C):±(40+20L)μin * L = Drive length (mm){±(1+4L/200)μm}α-axisInclination angle: -45° to +10°Resolution: 0.000225°Rotating speed: 1rpmZ2-axis (column)Vertical travel: 12" (300mm) or 20" (500mm)Resolution: 1.97μin (0.05μm)Measurement method: Reflective-type linear encoderDrive speed: Max. 7.87"/s (200mm/s) (CNC)0 - 2"/s (0 - 50mm/s) (joystick)Z1-axis (detector unit)Measuring range: ±1" (±25mm)Resolution:0.008μin (0.2μm) (CV-3000CNC),1.97μin (0.05μm) (CV-4000CNC)Measurement method: Linear encoder (CV-3000CNC),laser hologage (CV-4000CNC)Linear displacement: ± (120+|40HI)μin {±(3+|2Hl/25)μm}(CV-3000CNC)Accuracy (at 20°C)± (32+|10H|/)μin {±(0.8+|0.5Hl/25)μm}(CV-4000CNC)*H: Measurement height from thehorizontal position (mm)Stylus up/down operation: Arc movementFace of stylus: Upward/downwardMeasuring force: 30mNTraceable angle: Ascent: 70°, descent: 70°(using the standard stylus provided anddepending on the surface roughness)Stylus tipRadius: 25μm, carbide tipBase size (W x H):Base material:Mass:Power supply:Power consumption:29.5 x 23.6" (750 x 600mm)Granite529 lbs, 551 lbs (240kg, 250kg)(high column type)100 – 240VAC ±10%, 50/60Hz400W (main unit only)Hologage technology providesnear interferometer-gradeaccuracy using the interferencephenomenon of diffractedlight, coupled with a resolutionof 0.05μm over the entiredetecting range of 50mm.J-34US-1001