Mitutoyo1001 Catalog.pdf - JW Donchin CO.

Surftest Extreme SV-3000CNC+ Vision ProbeSeries 178 – CNC Surface Roughness TestersFEATURESto measure width and pitch.of positioning minute workpieces such asprecision molds and fiber optics.increases the overall measurementsthroughout.drive speeds of 200mm/s, which allowshigh–speed positioning that increasesthroughput of multiple profile/multipleworkpiece measurement tasks.and 0.75mN to select.SPECIFICATIONS to expand the measuring range for multipleworkpieces by positioning in the Y-axis aswell.incorporates an anti-collision safety device,the detector will automatically stop whenthe machine collides with a workpiece orfixture.Box, the user can make any movement byselecting the required axis using the twojoysticks. The current axis selection is easilyidentified by the icon on the key top.Model No.SV-3000CNC + Vision ProbeOrder No. 178-558A-1 (.75mN force) 178-558A-2 (4mN force)X1-axis measuring range 200mm 200mmZ2-axis vertical travel 350mm (from top of Y-axis) 350mm (from top of Y-axis)Y-axis table unit Installed Installedα-axis unit Installed InstalledSV-3000CNC + Vision Probe QVP IIwith PC system and softwarePC stand not includedWith the Vision Probe, the Surftest is able to set measurement position and perform vision measurements.Technical DataX1-axis 0~50mm/s (joystick) L1=measurement length (mm) 0~50mm/s (joystick) 0~50mm/s (joystick) L1=measurement length (mm) 5W or less 10W or less Cabin (protective shield) *1 Using standard stylus (12AAC731 or 12AAB403)Cut-off length λ*4 Using ring light unitJ-14US-1001