Assembly Instructions - Swing-N-Slide

More documents

Recommendations

Info

Assembly InstructionsFig. 402'' x 4'' x 29-3/4'' 2'' x 4'' x 29-3/4''2'' x 4'' x 20''Note:Center 2'’ x 4'' x 20'' Boardson2'' x 4'' x 29-3/4'' Assemblies.(8)2-1/2'' deckscrewsper side2'' x 4'' x 20''2'' x 4'' x 29-3/4''2'' x 4'' x 29-3/4''Fig. 40a(2)2-1/2'' screwsper joint(12) 5/4'' x 4'' x 40 ''Fig. 40b(2)"T" nutsNOTE: There must be a 1-1/4''Nominal Gap between allRock Wall boards.(2) 1-1/2'' Hex Head Bolts3/8" HolesHold (rock)(1) Loc Washer per bolt(1) Flat Washer per boltWARNING:Verify Rock Hardware BEFORE Drilling Holes2-1/2'' screwRock Wall Assembly.1. Assemble Rock Wall frame as shown in (Fig. 40).2. Attach 5/4'' x 4'' Rock Wall Boards as shown in (Fig. 40a).3. Mark locations of Climbing Rocks on the Climbing Wall in a pattern that will easily allow your child to climb tothe deck. Make sure the bolt hole locations are clear of wall supports before drilling.4. Drill holes through the wall at the desired locations using a 3/8" drill bit. Install Climbing Rocks as shown in(Fig. 40b).5. Make sure the Climbing Wall and Climbing Rock connections are secure before allowing any children to playon the Climbing Wall.38
Assembly InstructionsFig. 41Fig. 41a(3)2-1/2'' screwsper joint2-1/2'' screwUnder Deck ViewClimbing Rock Installation1. Attach the Rock Wall to the unit as shown in (Fig. 41) and (Fig. 41a).39
Page 1 and 2: NOTE: USE THIS PLAN ONLY TO BUILD E
Page 3 and 4: This product is intended for single
Page 5: R(2) Shelf-Loc(2) Split Beam bracke
Page 9 and 10: How to select the correct fastenerA
Page 11 and 12: Assembly InstructionsTIMBERGLOVE AP
Page 13 and 14: 4'' x 4'' x 120''Assembly Instructi
Page 15 and 16: DO NOT USE LAGSCREWS HEREUse Lag Sc
Page 17 and 18: Assembly InstructionsFig. 8(3)2-1/2
Page 19 and 20: Assembly InstructionsFig. 10(2)2-1/
Page 21 and 22: Assembly InstructionsFig. 12Fig. 13
Page 23 and 24: Assembly InstructionsFig. 163-3/4''
Page 25 and 26: Fig. 17bAssembly Instructions4'' x
Page 27 and 28: Fig. 18Align the edges of the 4" x
Page 29 and 30: Assembly InstructionsA-Frame Assemb
Page 31 and 32: Assembly InstructionsFig. 25NOTE:Se
Page 37: Assembly InstructionsFig. 37 Fig. 3
Page 41: Assembly InstructionsFig. 435/4'' x
Page 44 and 45: Assembly InstructionsFig. 46NOTE: 1
Page 48 and 49: Assembly InstructionsFig. 51(8)3/4'
Page 52 and 53: A-Frames Spaced40-1/2''Apart(Outsid
Page 54 and 55: Assembly InstructionsFig. 56MountBr
Page 58 and 59: Assembly InstructionsAnchor-ItFig.
Page 60 and 61: Assembly InstructionsOptional Disc
Page 62 and 63: Assembly Instructions62
Page 64: Questions???...Call our Customer Se

Assembly Instructions - Swing-N-Slide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?