DIGITAL PIANO - MIDI Manuals

Adding Variations to the Sound – ReverbThis control enables you to select various digital reverb effects that add extra depth and expressionto the sound to create a realistic acoustic ambience.ProcedureWhile holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to selecta reverb type.C ♯ 2D ♯ 2ENGLISHThe lowest keyKey Reverb Type DescriptionC2 Room This setting adds a continuous reverb effect to the sound, similar tothe acoustic reverberation you would hear in a room.C ♯ 2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulatesthe natural reverberation of a small-size concert hall.D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effectsimulates the natural reverberation of a large concert hall.D ♯ 2 Stage Simulates the reverb of a stage environment.E2 Off No effect is applied.C2D2E2Adjusting Reverb DepthAdjust the reverb depth for the selected voice by pressing one of the C3–G ♯ 4 keys whileholding down the [PIANO/VOICE] button. The depth range is from 0 through 20.G ♯ 4: depth 20The default reverb type (includingOFF) and depth settings aredifferent for each voice.The lowest key C3: depth 0 A4depth 0:depth 20:no effectmaximum reverbdepthThe depth value increases as you press higher keys.While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb tothe depth most suitable for the selected voice.20YDP-131/YDP-213 Selecting & Playing Voices18