DIGITAL PIANO - MIDI Manuals

More documents

Recommendations

Info

Backing up Data and Initializing theSettingsBacking up data to flash memoryThe following items will be stored in flash memory on this instrument. This data willbe kept after you turn off the power to the instrument.Metronome volumeMetronome tempoTouch sensitivityTuningBackup dataENGLISHRecorded performance data (user song)Song data once loaded from a computerInitializing the settingsWhen you initialize the settings, all data, excluding the user song and songs loadedfrom a computer, will be initialized and reset to the factory default settings.While holding down the C7 (the highest) key, turn on the power to the instrument.The data (excluding the data for the recorded performance and songs loadedfrom a computer) will be initialized.C7The highest keyCAUTIONDo not turn off the power to thisinstrument while it is initializingthe data in its internal memory(that is, while the [REC] and[PLAY] button indicators areflashing).If this instrument somehowbecomes disabled or malfunctions,turn off the power to theinstrument, then perform the initializationprocedure.To delete songs that have beenloaded from a computer to thisinstrument, use MusicsoftDownloader on the computer.32YDP-131/YDP-213 Transmitting Song Data between the Computer and the Digital Piano30
TroubleshootingProblemThis instrument does not turn on.A click or pop is heard when the power isturned on or off.Noise from the speakers or headphones isaudible.Possible Cause and SolutionThis instrument has not been plugged in properly. Insert the adaptor plug into an ACoutlet and the adaptor socket into the unit securely (page 11).This is normal when electrical current is being applied to the instrument.The noise may be due to interference caused by the use of a mobile phone in closeproximity to this instrument. Turn off the mobile phone, or move it further away fromthis instrument.The overall volume is low, or no sound isheard.The damper pedal has no effect, or the soundcontinuously sustains even when the damperpedal is not pressed.• The Master Volume is set too low. Set it to an appropriate level using the [MASTERVOLUME] control.• Make sure a pair of headphones is not connected to the headphones jack.• Make sure that Local Control (page 29) is ON.The pedal cord may not be properly connected. Make sure to securely insert the pedalcord into the [PEDAL] jack (page 36).ENGLISHOptionsBC-100 BenchA comfortable bench styled to match your Yamaha digital piano.UX16USB-<strong>MIDI</strong> interface31YDP-131/YDP-213 YDP-131/YDP-213 Troubleshooting/Options33
Page 1 and 2: DIGITAL PIANOYDP-131/YDP-213ESPAÑO
Page 3 and 4: PRECAUTIONSPLEASE READ CAREFULLY BE
Page 5 and 6: WelcomeThank you for purchasing the
Page 7 and 8: Application IndexUse this index to
Page 9 and 10: FeaturesThe Yamaha YDP-131/YDP-213
Page 11 and 12: MINMASTREVOLUMETurning the Power On
Page 13 and 14: ReferenceThis section explains how
Page 15 and 16: Listening to the Demo SongsDemo son
Page 17 and 18: Listening to Songs Loaded from theC
Page 19 and 20: Using the PedalsDamper (Right) Peda
Page 21 and 22: Layering Two Voices (Dual mode)You
Page 23 and 24: Using the MetronomeYour digital pia
Page 25 and 26: Recording your PerformanceYour digi
Page 27 and 28: Connecting MIDI InstrumentsYour dig
Page 29 and 30: MIDI FunctionsYou can make detailed
Page 31: Transmitting Song Data between theC
Page 35 and 36: AC INLET2-5 Securely tighten the sc
Page 37 and 38: IndexNumerics50 Piano Preset Songs
Page 39 and 40: Appendix/Anhang/Annexe/ApéndiceThi
Page 41 and 42: 4. PROGRAM CHANGEData format: [CnH]
Page 43 and 44: MIDI Parameter Change table (SYSTEM
Page 45 and 46: Specifications / Technische Daten /
Page 47 and 48: For details of products, please con

DIGITAL PIANO - MIDI Manuals

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?