DIGITAL PIANO - MIDI Manuals

More documents

Recommendations

Info

8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)(1) XG Native Parameter ChangeData format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->[mmH] -> [llH] -> [ddH] -> [F7H]F0H = Exclusive status43H = YAMAHA ID1nH = When received, n=0~F.When transmitted, n=0.4CH = Model ID of XGhhH = Address HighmmH = Address MidllH = Address LowddH = Data|F7H = End of ExclusiveData size must match parameter size (2 or 4 bytes).When the XG System On message is received, the MIDI systemwill be reset to its default settings.The message requires approximately 50ms to execute, sosufficient time should be allowed before the next message issent.(2) XG Native Bulk Data (reception only)Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->[bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...->[ccH] -> [F7H]F0H = Exclusive status43H = YAMAHA ID0nH = When received, n=0~F.When transmitted, n=0.4CH = Model ID of XGaaH = ByteCountbbH = ByteCounthhH = Address HighmmH = Address MidllH = Address LowddH = Data| || |ccH = Check sumF7H = End of Exclusive• Receipt of the XG SYSTEM ON message causes reinitializationof relevant parameters and Control Change values. Allowsufficient time for processing to execute (about 50 msec)before sending this instrument another message.• XG Native Parameter Change message may contain two orfour bytes of parameter data (depending on the parametersize).• For information about the Address and Byte Count values,refer to Table 1 below. Note that the table’s Total Size valuegives the size of a bulk block. Only the top address of theblock (00H, 00H, 00H) is valid as a bulk data address.10. SYSTEM EXCLUSIVE MESSAGES (Special Control)Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] ->[0nH] -> [ccH] -> [vvH] -> [F7H]F0H = Exclusive status43H = Yamaha ID73H = Digital Piano ID7FH = Extended Product ID4BH = Product ID11H = Special control0nH = Control MIDI change (n=channel number)cc = Control numbervv = ValueF7H = End of ExclusiveControl Channel ccH vvHMetronome Always 00H 1BH 00H : off01H : –02H : 2/403H : 3/404H : 4/405H : 5/406H : 6/4Channel Detune ch: 00H-0FH7FH : No accent43H (Sets the Detune valuefor each channel)00H-7FHVoice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH: on** When Volume, Expression is received for Reserve On, theywill be effective from the next Key On. Reserve Off is normal.11. SYSTEM EXCLUSIVE MESSAGES (Others)Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H]-> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H]Master Tuning (XG and last message priority) simultaneouslychanges the pitch of all channels.F0H = Exclusive Status43H = Yamaha ID1nH = When received, n=0~F.When transmitted, n=0.27H = Model ID of TG10030H = Sub ID00H =00H =mmH = Master Tune MSBllH = Master Tune LSBccH = don’t care (under 7FH)F7H = End of Exclusive9. SYSTEM EXCLUSIVE MESSAGES(Digital Piano MIDI Format)Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]F0H = Exclusive status43H = Yamaha ID73H = Digital Piano ID01H = Product ID (digital piano common)xxH = Substatusnn Control02H Internal MIDI clock03H External MIDI clock06H Bulk Data (the bulk data follows 06H)F7H = End of Exclusive42YDP-131/YDP-213 Appendix/Anhang/Annexe/Apéndice148
MIDI Parameter Change table (SYSTEM)Address (H) Size (H) Data (H) Parameter Description Default value (H)00 00 00 4 020C - 05F4(*1) MASTER TUNE -50 - +50[cent] 00 04 00 0001 1st bit 3 - 0 ➝ bit 15 - 12 40002 2nd bit 3 - 0 ➝ bit 11 - 803 3rd bit 3 - 0 ➝ bit 7 - 44th bit 3 - 0 ➝ bit 3 - 004 1 00 - 7F MASTER VOLUME 0 - 127 7F7E 00 XG SYSTEM ON 00=XG sytem ON7F 00 RESET ALL PARAMETERS 00=ON (receive only)TOTAL SIZE 07*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.MIDI Parameter Change table (EFFECT 1)Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.Address (H) Size (H) Data (H) Parameter Description Default value (H)02 01 00 2 00-7F REVERB TYPE MSB Refer to Effect MIDI Map 01(=HALL1)00-7F REVERB TYPE LSB 00 : basic type 0002 01 40 2 00-7F VARIATION TYPE MSB Refer to Effect MIDI Map 00(=Effect off)00-7F VARIATION TYPE LSB 00 : basic type 00• “VARIATION” refers to the EFFECT on the panel.MIDI Parameter Change table (MULTI PART)Address (H) Size (H) Data (H) Parameter Description Default value (H)08 nn 11 1 00 - 7F DRY LEVEL 0 - 127 7Fnn = Part Number• Effect MIDI MapREVERBMSB LSBROOM 02H 10HHALL 1 01H 10HHALL 2 01H 11HSTAGE 03H 10HOFF 00H 00HEFFECTMSB LSBCHORUS 42H 10HPHASER 48H 10HTREMOLO 46H 10HROTARY SP 47H 10HOFF 00H 00H149YDP-131/YDP-213 Appendix/Anhang/Annexe/Apéndice 43
Page 1 and 2: DIGITAL PIANOYDP-131/YDP-213ESPAÑO
Page 3 and 4: PRECAUTIONSPLEASE READ CAREFULLY BE
Page 5 and 6: WelcomeThank you for purchasing the
Page 7 and 8: Application IndexUse this index to
Page 9 and 10: FeaturesThe Yamaha YDP-131/YDP-213
Page 11 and 12: MINMASTREVOLUMETurning the Power On
Page 13 and 14: ReferenceThis section explains how
Page 15 and 16: Listening to the Demo SongsDemo son
Page 17 and 18: Listening to Songs Loaded from theC
Page 19 and 20: Using the PedalsDamper (Right) Peda
Page 21 and 22: Layering Two Voices (Dual mode)You
Page 23 and 24: Using the MetronomeYour digital pia
Page 25 and 26: Recording your PerformanceYour digi
Page 27 and 28: Connecting MIDI InstrumentsYour dig
Page 29 and 30: MIDI FunctionsYou can make detailed
Page 31 and 32: Transmitting Song Data between theC
Page 33 and 34: TroubleshootingProblemThis instrume
Page 35 and 36: AC INLET2-5 Securely tighten the sc
Page 37 and 38: IndexNumerics50 Piano Preset Songs
Page 39 and 40: Appendix/Anhang/Annexe/ApéndiceThi
Page 41: 4. PROGRAM CHANGEData format: [CnH]
Page 45 and 46: Specifications / Technische Daten /
Page 47 and 48: For details of products, please con

DIGITAL PIANO - MIDI Manuals

Create successful ePaper yourself

Delete template?

Save as template?