INFP - INFINITY Process Panel Meter DC Current ... - NEWPORT

Introduction 11.1 DESCRIPTION1.2 FEATURESThis Process meter is part of a complete line of process indicators/controllers, offering exceptional performance.The process meter is front panel programmable to accept 0-20 and 4-20mAdc current inputs, unipolar and bipolar DC voltage inputs andpotentiometer inputs. The meter will accept inputs from most of the processsensors in use today such as transmitters, pressure transducers, and potentiometers.Configuring the meter is accomplished through the 5 front panel buttons. Ifthe RS-232 or RS-485 communication option is installed, the user mayremotely set the display parameters.Options for the meter include analog and BCD outputs, relay outputs, andRS-232 or RS-485 communications.The following is a list of features of the meter.• 6-digit LED display in red or green• 0.005% accuracy of reading• 12 DC input ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V,±50 mV, ±500 mV, ±5 V, ±50 V, 0-20 mA, or 4-20 mA• 10 or 24 V dc sensor excitation• Peak & Valley detection and memory• External Tare• Up to 13 readings per second• 4 isolated open collector outputs(standard) and optional isolated relay orisolated BCD and isolated analog outputs• Optional isolated RS-232 or RS-485 communications• NEMA 4 Front Panel/IP65• Non-volatile memory without battery back-up• 115 Vac, 50/60 Hz, 230 Vac, 50/60 Hz power supply• Optional 10-32 Vdc power supply1