INFP - INFINITY Process Panel Meter DC Current ... - NEWPORT

Parts of the Meter 44.1 FRONT OF THE METERThe following is a brief description of each part of the front of the meter.121 2 2 2 3 2 4Figure 4-1. Front DetailITEM DESCRIPTION1 –.8.8.8.8.8. or 8.8.8.8.8.8.6-digit, 14 segment, alphanumeric 0.54” high LED display withprogrammable decimal point.2 SETPOINT LEDSETPTS MAX MIN MENU RESET3 4 5 6 7These LEDs, labeled 1 through 4, display the status of setpoints1, 2, 3 (Alarm 1), and 4 (Alarm 2).3 SETPTS BUTTONThis button functions only in the run mode. When theSetpoint/Alarm features are unlocked, pressing this buttonsequentially recalls the previous setpoint settings to the display.After the ‘MIN’ and ‘MAX’ buttons are used to alter thosevalues as desired, pressing the ‘SETPTS’ button, again, storesthese new values.Unless the ‘SETPTS’ button is pressed, each of the four setpointvalues is displayed for approximately 10 seconds after the lastpress of the ‘SETPTS’ button. Holding the ‘SETPTS’ buttondepressed stalls this automatic sequence, retaining the mostrecent setpoint number on the display.7