ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh
ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh
ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation Procedures Albatros <strong>PJ</strong>-<strong>1304NX</strong> Operation Instructions<br />
Removing shipping plate<br />
Open the rear cover.<br />
Loosen the fixing plate screw (1), by turning in<br />
counterclockwise, on the print head side.<br />
Manually move the print head assembly to the right.<br />
Tighten the head fixing screw on the print head, by<br />
turning it clockwise.<br />
Loosen fixing plate screw on the frame side (2).<br />
Now rotate the loosened fixing plate 180 degrees so<br />
that the bracket is pointing forwards (3). Tighten the<br />
screw to fix it.<br />
Make sure to secure the head fixation screw at the print head side,<br />
otherwise during printing it may fall.<br />
Page 25 AP-75013, Rev. 1.0. - 05/07/01<br />
2<br />
3<br />
1