ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh
ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh
ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Understanding the control panel & printer controls Albatros <strong>PJ</strong>-<strong>1304NX</strong> Operation Instructions<br />
PRINT POSITION ADJUSTMENT: MEDIA FEED AMOUNT<br />
This is used to print an adjustment pattern and specify an adjustment<br />
parameter for media feed amount.<br />
Range: [95.00% to 100.00% to 105.00%] (0.05% steps)<br />
Adjustment pattern printing and parameter specification<br />
When media feed amount adjustment pattern printing has been selected, after the<br />
adjustment pattern has been printed, the feed error is measured and an adjustment<br />
parameter is specified.<br />
Step 1:<br />
* Online *<br />
Ready to Print<br />
* Position Adj. *<br />
Repeatability ><br />
* Position Adj. *<br />
Feed Amount ><br />
* Position Adj. *<br />
Feed Amount ><br />
* Feed Amount *<br />
Adj. Pattern Print ><br />
PREV. Key : Cancel<br />
ENTER Key: Feed PTN<br />
* Feed > Print *<br />
Processing & printing<br />
Press ENTER Key<br />
After Check Amount<br />
* Feed > Parameter *<br />
From the online status display, press the [POSITION ADJ]<br />
key to shift to the Position Adjustment menu.<br />
Step 2:<br />
Press the [NEXT/+] or [LAST/-] keys to select “Feed<br />
Amount” from the two options of “Repeatability” and “Feed<br />
Amount” on the position Adjustment menu.<br />
Step 3:<br />
Press the [ENTER] key to confirm Feed Amount.<br />
Step 4:<br />
Press the [NEXT/+] or [LAST/-] keys to select “Adj. Pattern<br />
Print” from the two options of “Adj. Pattern Print” and<br />
“Parameter” on the media feed amount adjustment menu.<br />
Step 5:<br />
Press the [ENTER] key to confirm the adjustment pattern<br />
print.<br />
Step 6:<br />
After confirming the details, press the [ENTER] key to<br />
execute the adjustment pattern print.<br />
If the adjustment pattern is not to be printed, press the<br />
[PREVIOUS] key.<br />
Step 7:<br />
While the adjustment pattern is being printed, the display is<br />
as follows.<br />
Step 8:<br />
After the media feed adjustment pattern has finished being<br />
printed, a message requesting checking appears. Press the<br />
[ENTER] key.<br />
Step 9:<br />
Checking is based on measuring the feed error in the printed<br />
result. Press the [NEXT/+] or [LAST/-] keys to enter the<br />
amount that is considered to be the feed error.<br />
Page 68 AP-75013, Rev. 1.0. - 05/07/01