ALBATROS PJ-1304NX OPERATION INSTRUCTIONS - Mutoh

Installation Procedures Albatros PJ-1304NX Operation Instructions
N° Name Function
1 Operating panel Panel with operation keys, LCD message unit and LED status
indicator lamps.
2 Jet wash liquid tank This is the tank that holds the maintenance liquid (washing
liquid).
3 Ink tanks These tanks supply ink.
4 Air tubes These tubes adjust air within each tank.
5 Ink tank tubes Emerging from beneath the right cover, these tubes connect
the ink tanks with solenoid valves. (Marked K, C, M, Y
marks).
6 Jet wash tube Beneath the right cover, this tube connects the jet wash liquid
tank with the maintenance unit solenoid valve. (Marked J).
7 Ink tray This is the tray that holds the jet wash tank, ink tanks, waste
liquid tank. The ink tanks are placed in order from front to
back: K (black), C (cyan), M (magenta) and Y (yellow).
8 Waste liquid tank This tank recovers waste liquid generated when power is
switched on and during the cleaning operation.
9 Waste liquid tank
tube
This tube connects the waste liquid tank with the
maintenance unit pump. (Marked W)
10 Hold lever This lever is moved up and down when paper is loaded or
removed.
11 Cutter groove This groove is used when roll media is cut after printing.
12 Power switch This is the power switch (sequence switch) for operating the
printer.
13 Take-up mechanism This mechanism winds up media that has been printed.
14 Take-up scroller
shaft
This shaft is used by passing it through the take-up paper
tube.
15 Take-up paper tube This tube is used for winding up roll media.
16 Memory cover This is the cover for extending memory.
17 Board box This contains the main CPU board, power supply
components, etc.
Page 29 AP-75013, Rev. 1.0. - 05/07/01