9.1 TECHNICAL SPECIFICATIONSWeight 7kg (16 lbs) with 400’ load and on-board battery.Power Brushless, high efficiency tri-phase motor; 1.4 amp.consumption with film at 25°C (77°F) under 12V power supply(10-15V).Temperature Range -10°C (14°F) to +40°C (104°F)Noise Level 4-Perf: 30 / 33 dB. 3-Perf: 27 / 30 dBFrame Rate Sync speeds: 24, 25, 29.97, 30 fps. Built-in var crystalcontrol to 2 to 40 fps in 0.001 increments.Steadiness Co-planar claw movement for lateral and vertical steadinessto 1/2000th of image dimension.Viewing System Interchangeable screens: 1.37, 1.66, 1.78, 1.85aspect ratios.Camera Mounts Interchangeable hard front: ArriPL, <strong>Panavision</strong>,Nikon.Shutter Reflex mirror, user-convertible on option; 180° for 24 fpsunder 60 Hz lighting, 172.8° for 24 fps under 50 Hz, 150° for 25fps under 60 Hz, 144° for NTSC monitoir.<strong>35</strong> / Super <strong>35</strong> Quick centering of lens axis for either format.Time Code <strong>Aaton</strong>Code man-readable figures and rugged SMPTEmatrixes. 1/2 frame accuracy over 8 hours.Accessory Inputs Amph9 (video sync), Lemo6 (power zoom),Lemo8 (speed controllers de vitesse), Lemo5 (SMPTE and RS232).Video Assist Black & White - low power, high sensitivity, integratedCCD assist with manual iris. PAL or NTSC formats.Color - high sensitivity, flicker-free, integrated CCD assist withtimecode windows and Vitc insertion. PAL or NTSC formats.Magazine Instant, 400’, reading in feet or meters.LCD Display Speed selection, remaining footage, ISO selection,battery voltage, full <strong>Aaton</strong>Code readout via a single rotating jog.Operator Warning Speed discrepancy, misloading, low batteryindicator.Camera Shut-off Automatic at end of roll.86
TECHNICAL SPECIFICATIONS9.2 CONNECTOR - PIN ATTRIBUTIONSType Fonctions Diagram Localisation Pin Attributions2Lemo2 On/Off/Test Between the 1 Groundtwo motors. 2 StartLooking down.1Lemo5 TimeCode Under 1 Ground23Interface jog wheel. 2 Smpte In5 43 ASCII In/Out4 et 5l Not usedLemo6 Power Zoom1 6Above the right 1 -Batt25 motor.4 +Batt6 Start3 42, 3 & 5 Not used1Lemo8 Speed 28 Above and to 1 -BattControllers the right of 2 TV Sync37 the left motor. 3 ASCII In/Out4 +Batt465 100 PFF Out56 Start7 100 PFF In8 Ground5 4 3 2 1Amph9 Video Sync Above the 1 -Battleft motor.2 TV Sync3 2400 Hz9 8 7 64 ASCII In/Out5 +Batt6 -Batt7 Strobe8 Start9 +BattXLR4 Power In32Above the 1 -Battjog wheel.4 +Batt412 et 3 Not usedpinsocket87