You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Feature Dial Services Codesprocessed by the SPA. You can empty thecorresponding *code that you do not wantto SPA to process.One or more *code can be configured intothis parameter, such as *72, or*72|*74|*67|*82, etc. Max total length is 79chars. This parameter applies when theuser has a dial tone (1st or 2nd dial tone).Enter *code (and the following targetnumber according to current dial plan)entered at the dial tone triggers the SPA tocall the target number prepended by the*code. For example, after user dials *72,the SPA plays a prompt tone awaiting theuser to enter a valid target number. Whena complete number is entered, the SPAsends a INVITE to *72 asin a normal call. This feature allows theproxy to process features like call forward(*72) or BLock Caller ID (*67).Notes:- The *codes should not conflict with anyof the other vertical service codes internallyprocessed by the SPA. You can empty thecorresponding *code that you do not wantto SPA to process.- You can add a paramter to each *codein "Features Dial Services Codes" toindicate what tone to play after the *code isentered, such as *72`c`|*67`p`. Below are alist of allowed tone parameters (note theuse of back quotes surrounding theparmeter w/o spaces)`c` = `d` = `m` = `o` = `p` = `s` = `x` = No tones are place, x is any digitnot used aboveIf no tone parameter is specified, the SPAplays Prompt tone by default.- If the *code is not to be followed by aphone number, such as *73 to cancel callforwarding, do not include it in thisparameter. In that case, simple add that*code in the dial plan and the SPA willsend INVITE *73@..... as usual when userdials *73.Notes:© 2003 - 2004 <strong>Sipura</strong> Technology, Inc Proprietary (See Copyright Notice on Page 2) 33
Change language