3820 UG.book - Finn-ID

8UtilitiesTo Add a Test Code I.D. Prefix to All SymbologiesThis selection allows you to turn on transmission of a Code I.D. before thedecoded symbology. (See the Symbology Chart, included in the AppendixA, page A-1) for the single character code that identifies each symbology.) Thisaction first clears all current prefixes, then programs a Code I.D. prefix for allsymbologies. This is a temporary setting that will be removed when the unit isreset. For instructions on how to reset your scanner, refer to Reset Scanner(page 8-1).Reset ScannerAdd Code I.D. Prefix toAll Symbologies (Temporary)Scanning this bar code causes the scanner to re-link with the base.Reset ScannerShow Software RevisionScan the bar code below to output the current software revision, unit serialnumber, and other product information for both the scanner and base.Show RevisionShow Data FormatScan the bar code below to show current data format settings.Data Format Settings2020/3820 User’s Guide 8 - 1