3820 UG.book - Finn-ID

Number of Beeps – Good ReadThe number of beeps of a good read can be programmed from 1 - 9. The samenumber of beeps will be applied to the beeper and LED in response to a goodread. For example, if you program this option to have five beeps, there will befive beeps and five LED flashes in response to a good read. The beeps and LEDflashes are in sync with one another. To change the number of beeps, scan thebar code below and then scan a digit (1-9) bar code and the Save bar code onthe Programming Chart inside the back cover of this manual. Default = One.Number of Beeps/LED FlashesGood Read DelayThis sets the minimum amount of time before the scanner can read another barcode. Default = 0 ms (No Delay.)* No DelayShort Delay (500 ms)Medium Delay (1000 ms)Long Delay (1500 ms)User-Specified Good Read DelayIf you want to set your own length for the good read delay, scan the bar codebelow, then set the delay (from 0-30,000 milliseconds) by scanning digits fromthe inside back cover, then scanning Save.User-Specified Good Read Delay2020/3820 User’s Guide 3 - 3