3820 UG.book - Finn-ID

Wand Emulation Plug & PlayIn Wand Emulation mode, the scanner decodes the bar code then sends data inthe same format as a wand scanner. The Code 39 Format converts allsymbologies to Code 39.The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5without any changes, but converts all other symbologies to Code 39.The Wand Emulation Plug & Play Code 39 Format bar code below sets theterminal ID to 61. The Wand Emulation Plug & Play Same Code Format barcode sets the terminal ID to 64. These Plug & Play bar codes also set theTransmission Rate to 25 inches per second, Output Polarity to black high, andIdle State to high. (If you want to change the terminal ID only, without changingany other scanner settings, please refer to Terminal ID on page 2-1.)Wand Emulation (Code 39 Format)Wand Emulation Same Code1 - 22 2020/3820 User’s Guide