6218-A1 Wireless Router User's Guide - Zhone Technologies

3. Using the Web InterfaceFigure 3-4.PPPoE Connection SetupTo complete the connection you must now click the Apply button. The Apply buttonwill temporarily save this connection. To make the change permanent, click onTools (at the top of the page) and select System Commands. At the SystemCommands page, click on Save All.PPPoA Connection SetupPPPoA is defined in the Internet standard RFC 2364. It is a method ofencapsulating PPP packets over ATM cells which are carried over the DSL line.PPP (Point-to-Point Protocol) is a method of establishing a network sessionbetween network hosts. It usually provides a mechanism of authenticating users.LLC and VC are two different methods of encapsulating the PPP packet. Contactyour ISP to make sure which encapsulation is being supported.By selecting PPPoA, you are forcing your router to act as the termination point forthe PPPoA connection. This frees up your PC resources and allows multiple usersto utilize the PPPoA connection.To configure the router for PPPoA:Procedure1. Click on Setup and then click on New Connection. The default PPPoEconnection setup is displayed.2. At the Type field, select PPPoA from the drop-down list. The PPPoAconnection setup page is displayed.3. Give your PPPoA connection a unique name. The name must not have spacesand cannot begin with numbers.6218-A2-GB20-10 July 2005 3-7