6218-A1 Wireless Router User's Guide - Zhone Technologies

3. Using the Web InterfaceFigure 3-39.Update GatewayPing TestOnce you have your router configured, it is a good idea to make sure you can pingthe network. If you have your PC connected to the router via the default DHCPconfiguration, you should be able to ping the network address 192.168.1.2. If yourISP has provided their server address you can try to ping that address. If the pingsfor both the WAN and the LAN side are successful, and you have the properprotocols configured, you should be able to access the Internet.To run a ping test:Procedure1. From the Home screen, under the Tools title, click on Ping Test.2. Specify the target IP Address that you want to ping.Optionally, specify:— TOS Byte value. This is part of the IP header of the ping packet. Validvalues are 0 to 255.— Packet size. Valid values are 36 to 65507.— Number of echo requests. Valid values are 1 to 9.3. Click on Test.By default, when you select ping test, the router will ping itself three times. InFigure 3-40, the router passed the Ping Test; this basically means that the TCP/IPprotocol is up and running. If this first test does not pass, the TCP/IP protocol isnot loaded. In this case, restart the router.6218-A2-GB20-10 July 2005 3-43