POWERTECH™ 2.9 L OEM Diesel Engines - John Deere Industrial ...

Lubrication and MaintenanceLubrication And Maintenance Service IntervalChart—Prime Power EnginesLubrication and Maintenance Service IntervalsItem 250 Hour or 500 Hour or 2000 Hour orDaily6 Month 12 Month 24 MonthCheck Engine Oil and Coolant Level•Lubricate PTO Release BearingCheck Air Cleaner Dust Unloader Valve &Restriction Indicator aVisual Walk Around InspectionCheck Fuel FilterService Fire ExtinguisherLubricate PTO Clutch Shaft BearingService BatteryChange Engine Oil and Filter- All except3029TF270 Engines bCheck Fan and Alternator Belt TensionCheck PTO Clutch AdjustmentCheck Engine MountsChange Engine Oil and Filter- 3029TF270Engines cCheck Engine Ground ConnectionLubricate PTO Clutch Levers and Linkage (IfEquipped)Clean Crankcase Vent TubeCheck Air Intake Hoses, Connections, andSystemReplace Fuel Filter /Bleed SystemCheck Cooling SystemCoolant Solution Analysis-Add SCAs asneededPressure Test Cooling SystemCheck Engine SpeedsCheck and Adjust Valve ClearanceaReplace primary air cleaner element when restriction indicator shows a vacuum of 625 mm (25 in.) H2O.••••••••••••••••••••••As RequiredbChange the oil and filter for the first time after 100 hours maximum of operation, then every 250 hours thereafter. If recommended oils areused along with the specified John Deere oil filter, the oil change interval may be extended by 50 percent to 375 hours. (See DIESELENGINE OIL in Fuels, Lubricants, and Coolant section.)cChange the oil for the first time before 100 hours maximum of (break-in) operation, then every 500 hours thereafter. If PLUS-50 or ACEAE7/E6/E5/E4 oil is NOT used along with the specified John Deere oil filter, the oil change interval is reduced to 250 hours. (See DIESELENGINE OIL in Fuels, Lubricants, and Coolant section for oil pan and fuel sulfur content restrictions.)Continued on next pageRG,RG34710,5058–19–30MAY06–1/220-3 060106PN=65