POWERTECH™ 2.9 L OEM Diesel Engines - John Deere Industrial ...
POWERTECH™ 2.9 L OEM Diesel Engines - John Deere Industrial ...
POWERTECH™ 2.9 L OEM Diesel Engines - John Deere Industrial ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lubrication & Maintenance/250 Hour/6 MonthChanging Engine Oil And Replacing OilFilter-All Except 3029TF270 <strong>Engines</strong>NOTE: Change engine oil and filter for the first time after100 hours maximum of operation, then every 250hours thereafter.If <strong>John</strong> <strong>Deere</strong> PLUS-50 engine oil and the specified <strong>John</strong><strong>Deere</strong> oil filter are used, the oil and filter change intervalmay be increased by 50% to 375 hours.OILSCAN is a <strong>John</strong> <strong>Deere</strong> sampling program to help youmonitor machine performance and identify potentialproblems before they cause serious damage. OILSCANkits are available from your <strong>John</strong> <strong>Deere</strong> dealer. Oilsamples should be taken prior to the oil change. Refer toinstructions provided with kit.Oil Pan Drain PlugRG4881 –UN–29NOV88To change engine oil and filter:1. Run engine approximately 5 minutes to warm up oil.Shut engine off.2. Remove oil pan drain plug (arrow).NOTE: Drain plug location may vary, depending on theapplication.3. Drain crankcase oil from engine while warm.Continued on next pageRG,RG34710,5064–19–13FEB03–1/330-4 060106PN=77
Change language