POWERTECH™ 2.9 L OEM Diesel Engines - John Deere Industrial ...

Lubrication & Maintenance/250 Hour/6 MonthServicing Fire ExtinguisherA fire extinguisher (A) is available from your authorizedservicing dealer or engine distributor.Read and follow the instructions which are packaged withit. The extinguisher should be inspected at least every 250hours of engine operation or once a month. Onceextinguisher is operated, no matter how long, it must berecharged. Keep record of inspections on the tag whichcomes with the extinguisher instruction booklet.A—Fire ExtinguisherService Fire ExtinguisherRW4918 –UN–15DEC88RG,RG34710,5062–19–30JAN98–1/1Lubricating PTO Clutch Shaft BearingsApply one or two shots of John Deere MultipurposeLubricant or equivalent at clutch drive shaft bearing fitting(B) and pilot bearing fittings (D). DO NOT over-lubricate toavoid getting oil on clutch facings.NOTE: Location of pilot bearing fitting will depend onapplication. Only one fitting will be used.A—Release Bearing Grease FittingB—Drive Shaft Bearing FittingC—Lever Cross Shaft FittingsD—Pilot Bearing FittingLubricate PTO ClutchRG7331C –UN–26JUN00RG,RG34710,5061–19–30JAN98–1/130-1 060106PN=74