POWERTECH™ 2.9 L OEM Diesel Engines - John Deere Industrial ...

Lubrication and MaintenanceLubricant And Maintenance Service IntervalChart—Generator (Standby) ApplicationsNOTE: The service intervals in the Lubrication andMaintenance Sections that follow reflect standardengines. Use service intervals listed below forgenerator (standby) applications. Match serviceitems below to titles in Lubrication andMaintenance Sections for procedures.Lubrication and Maintenance Service IntervalsItem Every 2 250 Hour or 500 Hour or 2000 Hour orWeeks 6 Month 12 Month 24 MonthOperate Engine at Rated Speed and•50%-70% Load a Minimum of 30 MinutesCheck Engine Oil and Coolant LevelCheck Fuel FilterLubricate PTO Release BearingsCheck Air Cleaner Dust Unloader Valve &Restriction Indicator Gauge aVisual Walkaround InspectionService Fire ExtinguisherLubricate PTO Clutch Shaft BearingsService BatteryChange Engine Oil and Replace Oil Filter-All Except 3029TF270 Engines bCheck Fan and Alternator Belt TensionCheck PTO Clutch AdjustmentCheck Engine MountsChange Engine Oil and Filter- 3029TF270Engines cCheck Engine Ground ConnectionClean Crankcase Vent TubeCheck Air Intake Hoses, Connections &SystemReplace Fuel Filter/Bleed SystemCheck Cooling SystemCoolant Solution Analysis-Add SCAs asrequiredaReplace primary air cleaner element when restriction indicator shows a vacuum of 625 mm (25 in.) H20.•••••••••••••••••••As RequiredbChange the oil and filter for the first time after 100 hours maximum of operation, then every 250 hours thereafter. If recommended oils areused along with the specified John Deere oil filter, the oil change interval may be extended by 50 percent to 375 hours. (See DIESELENGINE OIL in Fuels, Lubricants, and Coolant section.)cChange the oil for the first time before 100 hours maximum of (break-in) operation, then every 500 hours thereafter. If PLUS-50 or ACEAE7/E6/E5/E4 oil is NOT used along with the specified John Deere oil filter, the oil change interval is reduced to 250 hours. (See DIESELENGINE OIL in Fuels, Lubricants, and Coolant section for oil pan and fuel sulfur content restrictions.)Continued on next pageOUOD002,0000022–19–26MAY06–1/220-5 060106PN=67