You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
185. Using a 5mm hex wrench tighten thefour barrel clamping screws to 80 inch/ lb. of pressure. A torque wrench ishighly recommended for this step toprevent over tightening the lockingscrews (fig. 9).6. Using a 5mm hex wrench rotate thebarrel lock clockwise 180˚ to lock (seefig. 4 on page 15).Figure 9CAUTION: EXCEEDING THE TORQUE SPECIFICATION WHEN TIGHT-ENING THE BARREL LOCKING SCREWS CAN PERMANENTLY DAMAGEYOUR RECEIVER AND WILL VOID ALL WARRANTIES (Portable torquewrenches are available to purchase at our website at www.deserttacticalarms.com orby calling (801) 975-7272).
Change language