HTI Manual - Desert Tactical Arms

Deposits that cannot be readily removed with the brush may be treated bycoating the bore and chamber with good quality bore & chamber fluid andallowing to soak for at least twelve hours.• After soaking: repeat above procedure. The barrel should be cleaned and reoiled,at least once on the day after firing.• Firing Mechanism: Remove all powder residues from bolt face and interiorsurfaces of the bolt. If necessary, use stiff nylon brush or tooth brush.• Receiver: Wipe off any heavy deposits in the interior and oil lightly.• Magazine: Make sure the magazine/s are clean and the follower movesfreely.43