You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. Receiver Interior: A visual and manual inspection of the inside of the receiverwill reveal what, if any cleaning is necessary. Most debris can be removed witha cloth, cleaning patch, or cleaning brush.6. Bolt Face: Ensure that the bolt face is free from debris that will create headspace,chambering problems, and/or inhibit function of either the extractor orejector. This area can be wiped clean or blown out. This is also a good time toensure that the ejector and the extractor are functioning properly by manuallyactuating them to ensure proper spring function and return. Also, a small amountof Break Free may be applied to the bolt face area at this time.7. Bolt Interior: The operator should occasionally remove the firing pin assemblyfrom the bolt (see pages 44-48). Wipe this area clean prior to applying a smallamount of Break Free.8. General Cleaning: The entire rifle should be wiped off with a clean cloth lightlysaturated with Break Free on occasion. This includes the barreled action, scoperings, and ancillary components.41
Change language