HTI Manual - Desert Tactical Arms

• Next, identify your scope base taper (20, 30, 40 MOA). Rotate elevation knob downby whichever taper you have.Example:Scope: Nightforce NXS 5-22x50Total Windage=60 MOA= 3022Total Elevation = 100 MOALess the scope base= 50 = 1022taper of 40 MOAThe scopes center is approximately 30 MOA from the edge of the windagetravel and 10 MOA from the bottom of the elevation travel.2. You are now ready to zero.3. You can zero the rifle at any distance you desire. Starting your initial zeroing at25 yards is the easiest method to get on paper. Zeroing at 100 yards requires analert spotter, a good spotting scope, and a large white paper target. If your firstshots are not on the paper try shooting a dirt backstop because shooting dirt ismuch easier to observe than paper.33