HTI Manual - Desert Tactical Arms

More documents

Recommendations

Info

SAFETY PRECAUTIONS4Remember that even the safest gun is potentially dangerous to you and others when it isnot properly handled. Read carefully the operating instructions to learn the proper use andfunctionality of the weapon.Make sure the rifle is unloaded prior to the following:• Receiving or handing over the rifle to another person.• Transporting the rifle.• Cleaning or disassembly.Always remove the magazine immediately after firing and make sure that the chamber isempty. Make sure that the fire selector (safety catch) is on “S” (Safe) position to guaranteethat the rifle is safe whenever:• Inserting magazine.• You have stopped firing the rifle.• The rifle is being transported or moved.• The rifle is not in use.
Before shooting the rifle:• Always wear eye and ear protection.• Always be sure of target backstop and what lies beyond it.CAUTION: MAKE SURE THAT THE BARREL IS FULLY SEATED AND LOCKINGSCREWS ARE TIGHT BEFORE FIRING, AS DESCRIBED ON PAGES 14-18.Do not use excessive force when disassembling or assembling your weapon. Unauthorizedmodifications to the mechanism, damages caused by the application of force, and modificationseffected by third parties will lead to the manufacturer not to assume any liability. Onlya DTA certified armorer is allowed to work on the <strong>HTI</strong> with the exception of the instructionscovered in this owners manual.REMEMBER: ALWAYS ASSUME THAT THE RIFLE IS LOADED: LOOK-ING INTO THE END OF THE BARREL (MUZZLE) IS NOT RECOMMENDEDAT ANY TIME.5
Page 3 and 4: For video instructions see our webs
Page 5: CARE AND CLEANING..................
Page 9 and 10: SIGHTSPicatinny rail (no taper)BARR
Page 11 and 12: CompactRuggedThe HTI’s bullpup de
Page 13 and 14: Other Benefits• The full length M
Page 15 and 16: DISASSEMBLY AND ASSEMBLY1. This cha
Page 17 and 18: REMOVING BARREL1. Remove buttpad an
Page 19 and 20: 3. Make sure the barrel is fully se
Page 22 and 23: 6. Ease the spring and follower out
Page 24 and 25: REMOVING STOCK PANELS221. Place the
Page 26 and 27: LOADING AND UNLOADINGINSERTING THE
Page 28 and 29: UNLOADING (CLEARING) THE HTI1. Plac
Page 30 and 31: ADJUSTING CHEEK PIECE1. With an 5mm
Page 32 and 33: 6. Install ring tops.7. Finger tigh
Page 34 and 35: QUICK ZEROING1. Find the center of
Page 36 and 37: 344. Once on paper, shoot a three s
Page 38 and 39: It is easier to train yourself to s
Page 40 and 41: INITIAL CLEANING1. Upon receipt of
Page 42 and 43: • Allow to sit for 15 minutes.•
Page 44 and 45: BEFORE AND AFTER FIRINGCLEANING BEF
Page 46 and 47: ADDITIONAL DISASSEMBLY & AS-SEMBLYB
Page 48 and 49: BOLT ASSEMBLY1. Insert the firing p
Page 50 and 51: 5. Hold the bolt with the end cap f
Page 52 and 53: 2. MAGAZINE NOT EMPTY (Malfunction)
Page 54 and 55: B. FAILURE TO CHAMBER * Bolt does n
Page 56 and 57:
4. Fouled Extractor5. Extractor Def
Page 58 and 59:
PARTS EXPLODED VIEWHTI56BarrelBoltR
Page 60 and 61:
MAGAZINE58Floor PlateFollowerMagazi
Page 62 and 63:
PATENTS PENDINGNo part of this docu
show all

HTI Manual - Desert Tactical Arms

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?