You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TRIGGER ADJUSTMENTSAdjusting Creep1. Insert a 2mm hex wrench through thefront hole in the bottom of the triggerguard into the front screw on the trigger(fig. 23). Turn clockwise to get lesscreep and counterclockwise for morecreep.Figure 23Adjusting Weight Pull2. Using a 2.5mm hex wrench, loosen thescrew on the side of the trigger. Slidetrigger forward or back to the positiondesired then tighten screw (fig. 24).Figure 2427
Change language