Download Here - James L. Schaller, M.D., M.A.R., P.C

Environmentally Friendly Mold Remediation Techniques That Significantly Reduce Childhood AsthmaAfter rebuild, the remediated areas and all surrounding areas should beinspected for cleanliness using the "white glove test". The should be nosettled dust. All surfaces must have been cleaned and HEPA vacuumedto remove any mold spores in the settled dust. Air testing withoutcleaning settled dust is not sufficient for a post-remediation clearance.Phase IV – DryingDate:__________________❏ Bulk removal – remove all wet drywall as necessary to inspect allhidden areas❏ Contaminated material properly removed (sealed plastic bags)❏ Carpets and padding (dry carpets; however, if wet longer than 48hours, discard!)❏ Evaporation methods used (wet vac, material removal, fans,vacuum with HEPA filter).Specify:____________________________________________❏ Dehumidification methods used.Specify:____________________________________________❏ Wall cavities and behind cabinets dried?Explain: ___________________________________________Phase V – MonitoringDate:__________________Meter reading (laser particle count @ 5 & 10 micron, moisture meter,IR Camera, RH/Temp, Air Samples Taken). Check ❏ if photos taken.Specify type and area(s): _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________128