DigiTrace NGC-UIT Loader Utility - Pentair Thermal Management

Step 1Connect a laptop computer to the DigiTrace NGC-UIT via the RS-232 port.Step 2 Start the DigiTrace UIT Loader program by clicking on the icon on your desktop or by going to Start menu/Programs/Pentair ThermalManagement/DigiTrace Click on the XML to NGC-UIT tab near the top of the window.Step 3Step 4Step 5Set the NGC-UIT Port to the port that will be used to communicate to the NGC-UIT (Label F).Set the DigiTrace NGC-UIT Baud Rate and NGC-UIT Modbus Address so thatit matches the settings on the NGC-UIT’s System|Comm screen (Label A/G andLabel B/H consecutively).Set the DigiTrace NGC-UIT’s Serial Port mode is RS-232 (Label C).Set the DigiTrace NGC-UIT’s Read/Write Port to Serial (Label D).Click on the Select XML File (Label I) text field to bring up the Select XML Fileto Download dialog box.Select the file you wish to send to the NGC-UIT.Click on Open. This will fill in the Select XML File text field with the path wherethe XML file is located.Click on the Transmit button (Label J). The program will then send the datafrom the XML file to the DigiTrace NGC-UIT.RS-485 ConnectionUse the RS-485 port when multiple DigiTrace NGC-UIT units are to be connected to ahost computer or the connection is longer than 15 meters (50 feet). A converter may beTHERMAL MANAGEMENT SOLUTIONS EN-NGC30LoaderUtility-IM-H58045 04/13 16/34